Australia +61-2-4272 2055 | Welcome to our new website, found an issue or bug? Please report it here
CP-DPP-RHS-RHP-RS
Panel Punches & Hole Saws for Temperature Connectors & DIN Meters
Models In Stock
- DIN Size Panel Punches - DPP Series
• 1/32, 3/64, 1/16, 1/16 Square, 1/8 and 1/4 DIN Sizes
• Will Accept any Standard DIN Size Controllers and Panel Meters
• Will Cut a Clean Hole in up to 11 Gage (.090) Aluminum or up to 14 Gage (.075) Mild Steel - Rectangular Hole Punches - CP Series
• Rugged Industrial Design
• Square Corners
• Sizes to Mount All OMEGA Connectors
• Keyed Design Assures Alignment of Punch and Die
• Simply Drill a Pilot Hole and Then Punch Out the Exact Shape for Your Connector
• For panels up to 1.5mm (0.06") Thick - Round Hole Punches - RHS and RHP Series
• No Reaming or Filing
• 6.35 mm (1/4") or 9.52 (3/8") Pilot Hole
• Exact Size for RMJ and RSJ Connectors - Hole Saws - RS Series
• For Panels Over 3 mm (1/8")Thick
• Replaceable Blades
• 6.35 mm (1/4") Pilot Drill
CP-DPP-RHS-RHP-RS
From
AUD
1,967.29
Models In Stock
Product Overview
- Series ID CP-DPP-RHS-RHP-RS
Supported Applications
The Omega CP, DPP, RHP, RHS, and RS series comprises panel punches and hole saws designed for creating precise cutouts in aluminum and mild steel panels. These tools facilitate the mounting of thermocouple connectors, DIN-size controllers, and panel meters.
- Rectangular connector installations (CP Series)
- DIN size controller openings (DPP Series)
- Round connector and meter mounts (RHP and RHS Series)
Operating Conditions & Performance
The series is engineered for clean, precise cutouts in aluminum and mild steel panels. The tools are not designed for use with pneumatic impact tools; manual operation is required to maintain dimensional accuracy.
Cutout dimensions across the series range from 8.1 x 16.8 mm (0.318 x 0.661) up to 92 x 92 mm (3.622 x 3.622), with tolerances specified as ±0.001 inch in the source documentation.
Configuration Options
DIN Size Panel Punches (DPP Series)
- DPP-1: ½ DIN size, cutout dimensions 22.5 x 45 mm (0.886 x 1.772), pilot hole 12.7 mm (½).
- DPP-2: ¾ DIN size, cutout dimensions 22.5 x 68 mm (0.886 x 2.677), pilot hole 12.7 mm (½).
- DPP-3: 1 DIN size, cutout dimensions 22.5 x 92 mm (0.886 x 3.622), pilot hole 12.7 mm (½).
- DPP-4: ¼ DIN Square, cutout dimensions 45 x 45 mm (1.772 x 1.772), pilot hole 19 mm (¾).
- DPP-5: ½ DIN size, cutout dimensions 45 x 92 mm (1.772 x 3.622), pilot hole 19 mm (¾).
- DPP-6: 1 DIN size, cutout dimensions 92 x 92 mm (3.622 x 3.622), pilot hole 19 mm (¾).
Rectangular Connectors (CP Series)
The CP series supports various rectangular connector types including SMP, NMP, OSTW, OTP, JP, TPJ, NHX, and SHX.
- CP-1: 8.1 x 16.8 mm (0.318 x 0.661) for SMP/SMPW; pilot hole 6.35 mm (¼).
- CP-2: 9.5 x 16.7 mm (0.375 x 0.656) for NMP; pilot hole 7.9 mm (⅝).
- CP-3 to CP-8 cover dimensions from 13.1 x 36.8 mm up to 16.4 x 26 mm with corresponding connector compatibility.
Hole Saws and Round Connectors
The RHS series provides hole saws, while the RHP series offers round punches for specific meter diameters.
- RHS-43: 43 mm (1⅝) diameter for CN77R3 & R5 Panel Meters; pilot hole 6.35 mm (¼).
- RHS-58 and RHS-78: Diameters of 15.87 mm (0.625) and 22.22 mm (0.875) respectively.
- RS Series replacement saws are available for the RHS series models RS-58 and RS-78.
Safety & Usage Notes
The documentation explicitly states: "DO NOT USE PNEUMATIC IMPACT TOOLS WITH THESE PUNCHES!" Additionally, these products are not designed for human applications. Omega accepts no liability for errors in the document and reserves the right to alter specifications without prior notice.
Key Product Differences
The series distinguishes between punch types (CP, DPP, RHP) and hole saws (RHS), with specific model numbers assigned to each cutout dimension and target device. The RS series serves as replacement blades for the RHS hole saws.
PDFs & Manuals