Australia +61-2-4272 2055 | Welcome to our new website, found an issue or bug? Please report it here
LCDA
Low Profile, Bending Beam Load Cell
- Provides Maximum Protection Against Adverse Loads
- Sealed for Washdown Areas
- 0.25% Interchangability
- Calibration Certificate with 59 kOhm Shunt Cal Data Provided
Product Overview
- 5-Point Calibration Calibration in compression
- Bridge Resistance 350 Ω
- Cable Length 20 ft
- Calibration Option NIST
- Creep in 20 min ± 0.03%
- Electrical Connection Cable
- Electrical Output 3 mV/V
- Hysteresis 0.0002
- Interchangeability 0.0025
- Length 2.81 in
- Linearity ± 0.03%
- Load Cell Type Bending Beam
- Materials Stainless Steel, Neoprene
- Operating Temperature, Max 66 °C
- Operating Temperature, Min -18 °C
- Outer Diameter 1.12 in
- Overload, Max 150% FS
- Process Temperature, Max 66 °C
- Process Temperature, Min -18 °C
- Repeatability 0.0001
- Safe Overload 150% FS
- Series ID LCDA
- Supply Power Note 10 Vdc, 15 Vdc maximum
- Supply Voltage 10 to 15 Vdc
- Thermal Span Effect 0.0008% rdg/°F
- Thermal Zero Effect 0.0015% FS/°F
- Wire Gauge 22 AWG
- Wiring/Connector Table Green: (+) Output; White: (-) Output; Black: (-) Input; Red: (+) Input
- Zero/Balance Error 0.01
Supported Applications
The Omega LCDA Series consists of Low Profile Bending Beam Load Cells designed for industrial applications. These sensors are constructed from high-quality alloy steel, nickel-plated for corrosion resistance, and sealed specifically for washdown areas.
Operating Conditions & Performance
The series operates within an ambient temperature range of 0 to 150°F (-18 to 66°C). Measurement is performed in compression with a rated capacity envelope spanning from 0-25 lb to 0-500 lb. The load cells provide a nominal resistance of 350 Ω and deliver a full-scale output signal of 3 mV/V ±0.0075 mV/V when excited by up to 15 Vdc (nominal excitation is 10 Vdc).
Performance specifications include an accuracy class of 0.03% FS, hysteresis of 0.02% FS, and repeatability of 0.01% FS. The series offers 0.25% interchangeability with a calibration certificate provided for each unit.
Configuration Options
The LCDA Series is available in seven distinct rated capacities: 25 lb, 50 lb, 75 lb, 100 lb, 150 lb, 250 lb, and 500 lb. Each model follows the ordering format LCDA-<CAPACITY>, such as LCDA-100 for a 100 lb capacity unit.
Physical construction features an overall length of 71 mm (2.81 in) and a diameter of 6.6 mm (0.26 in). The mounting dimensions include a 25 mm (1.0 in) mounting diameter and a 46 mm (1.81 in) body length. Wetted materials consist of nickel-plated steel with a neoprene boot.
Electrical connection is provided via a 6 m (20') 4-conductor shielded 22-gage wire cable. The series includes NIST certification and carries a 2 YEAR WARRANTY.
Compatible Meters
- DP3002-S
- DP87
- DP41-S
- DP25-S
An accessory reference book, Foundations of Food Preparation, is available under model number GE-2473.
Key Product Differences
Variation within the series is defined by rated capacity and corresponding deflection values. The 0-25 lb (LCDA-25) and 0-50 lb (LCDA-50) models exhibit a deflection of 0.008 in. Deflection increases to 0.010 in for the LCDA-75 and LCDA-100, 0.012 in for the LCDA-150, 0.016 in for the LCDA-250, and 0.023 in for the LCDA-500.