검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

SJP

Jack Panel Assemblies with Standard Thermocouple Connectors

재고가 있는 모델
  • Fully Assembled
  • Snap-in Jacks
  • Number Labels Included with Packaging
  • Easy Installation
SJP
시작 AUD 210.87
재고가 있는 모델
Jack Panel Assemblies with Standard Thermocouple Connectors SJP SJP
loading all models
제품 개요
  • Hole Spacing Diameter 0.19 in
  • Panel Thickness 0.09 in
  • Series ID SJP

Supported Applications

The Omega SJP Series consists of Jack Panel Assemblies with Standard Thermocouple Connectors designed for thermocouple connection points in control panels and instrumentation setups. These assemblies feature snap-in female connectors that accept standard or miniature male thermocouple plugs, providing a durable interface for signal routing.

Operating Conditions & Performance

The SJP series is constructed from 2.3 mm (0.09") anodized aluminum with high-impact plastic connector bodies to ensure durability in industrial environments. The maximum service temperature for the panels is rated at 205°C (401°F). Electrical connections utilize collet-type, spring-loaded terminals within universal female connectors.

Configuration Options

The series supports a wide range of configurations defined by row count and total jack quantity. Panels are available in single-row through four-row layouts with varying circuit densities per row (6, 12, or 18 circuits). The model number format follows the pattern SJP<ROWS>-<JACKS>-<CALIBRATION>, where the suffix indicates the specific thermocouple type.

Available configurations include:

  • Row Configurations: Panels are offered in 1, 2, 3, or 4 rows. Heights range from 67 mm (2.63") for a single row to 203 mm (8.00") for four rows.
  • Circuit Density: Rows can accommodate 6, 12, or 18 circuits per row, resulting in total jack counts ranging from 6 up to 72 jacks depending on the model.
  • Thermocouple Calibrations: The series supports standard calibrations including J, K, T, E, R, S, N, and U. Tungsten alloy types G, C, and D are also supported per product overview documentation.
  • Housing Options: Standard panels feature color-coded anodized aluminum faces corresponding to the thermocouple type. Blank panel options (suffix BLANK) are available for custom labeling or mixed-use applications.

Additional features and accessories include loose ID labels supplied with each unit for field identification, dust caps (SPJ-CAP-12), and the option to supply male plugs in place of female jacks. Custom color-coded anodized panels are available through Omega's Custom Engineering Department.

Mounting Specifications

The SJP series is designed for face-mount installation with specific hole spacing requirements:

  • Hole spacing: 4.8 mm (0.19") on both sides.
  • Mounting holes: 4.8 mm (0.19") diameter, suitable for #8 screws.

Key Product Differences

Variants within the SJP series are distinguished by their physical dimensions and connector calibration types. The primary differentiator is the model number suffix which denotes the thermocouple type (e.g., -K, -J, -T) or indicates a blank panel (-BLANK). Some models include an "I" suffix (e.g., KI, NI), indicating specific insulation or internal configurations as listed in variant data.

Panel dimensions scale with the number of rows and circuits. For example, a 1-row panel with 6 jacks measures 146 mm L x 67 mm H (5.75" x 2.63"). A 4-row configuration with 72 total jacks reaches an overall height of 203 mm (8.00") and a length dependent on the circuit density per row.

Ordering requires specifying the number of rows, the total number of jacks, and the calibration type to ensure compatibility with existing thermocouple instrumentation systems.

SJP1-06SJP1-12SJP1-18SJP2-12SJP2-24SJP2-36SJP3-18SJP3-36SJP3-54SJP4-24SJP4-48SJP4-72SJP1-10SJP1-13SJP1-16SJP2-30SJP2-32-J-K-T-E-R/S-U-N-BLANK-G-C-DI-M
Standard Jack Panels
Thermocouple Types
Color Code Standard
Option
ko-KR
en_AU
설정 저장