한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요
DPS20-Series
스트레인 미터 - 6자리 디스플레이 및 3 릴레이 출력
재고가 있는 모델
- 빠른 액세스 메뉴 - 전면 패널 제어
- 설정 가능한 영점 조정 기능
- 옵션 릴레이 및 아날로그 출력 모델
- 원하지 않는 영점 조정을 방지하기 위한 최대 영점 값 정의
- 독립 스케일링
- 옵션 Modbus RTU RS-485 모델
- 5단계 밝기 조절
- 비밀번호 보호
제품 개요
- 정확도 ± 0.05%
- 초당 획득 수 16, 50 또는 60 acq./sec. (설정 가능)
- 컷아웃 치수 1.74 x 3.63 인치
- 디스플레이 노트 자리수: 6; 판독값: 999999/-199999; 소수점: 구성 가능; LED 색상: 적색 숫자; 높이: 14mm (0.55’’)
- 디스플레이 유형 LED
- 전기 연결 나사 단자
- 외함 등급 IP65, NEMA 타입 4
- 외부 접점 구성 가능한 기능
- 폼팩터 1/8 DIN
- 높이 1.89 in
- 임피던스 입력 20 MΩ
- 입력 구성 전면 키패드
- 입력 범위 사양 참고 100mV, 30mV, 20mV, 15mV, 10mV, 5mV
- 입력 유형 변형
- 길이 3.58 in
- 로드셀 타입 1 mV/V, 2 mV/V, 3 mV/V
- 측정 유형 변형
- 장착 패널
- 셀 수 1대 ~ 8대의 부하 셀(5 Vdc) 및 1대 ~ 4대의 부하 셀(10 Vdc)
- 표시 자릿수 6
- 입력 수 1
- 와이어 수 4, 6
- 작동 온도, 최대 50 °C
- 최소 작동 온도 0 °C
- 전력 소비 1.5 W 4 W
- 전력 소비 사양 참고 <1.5W(계측기만) 및 <4.0W(출력 옵션 포함 계측기)
- 전선 최대 2.5mm²
- 샘플링 속도 60Hz (초당 60회 업데이트)
- 센서 여기 5 Vdc 또는 10 Vdc(구성 가능), 최대 Exc. 전류: 140 mA, 입력 시 최대 Vdc: ± 30 Vdc
- 시리즈 ID DPS20-Series
- 단계적 응답 17, 20 또는 63 ms (신호의 0%에서 99%)
- 스텝 응답 사양 참고 17, 20 또는 63 mSec (설정 가능)
- 저장 온도, 최대 70 °C
- 보관 온도 최소 -20 °C
- 전원 유형 AC / DC
- 열 안정성 50 ppm/°C
- 무게 150 g
- 폭 3.48 in
Supported Applications
The Omega DPS20 Series is a digital panel meter designed for load cell signal measurement. The series supports industrial applications including assembly lines, control panels, and laboratories where high-performance weight monitoring is required.
Operating Conditions & Performance
The DPS20 features a 6-digit red LED display with 14 mm digit height and provides readings from -199999 to 999999. Accuracy at 25°C is specified as 0.05% FS, with thermal stability of 50 ppm/°C. The meter accepts excitation voltage configurable to +5 Vdc or +10 Vdc and supports up to eight standard 350 Ohms cells (at 5Vdc) or four load cells (at 10Vdc). It accommodates 4-wire and 6-wire cell configurations with internal signal ranges of 100mV, 30mV, 20mV, 15mV, 10mV, and 5mV.
Performance includes configurable acquisition speeds of 16, 50, or 60 acq./sec. Step response (0% to 99% of signal) is selectable at 17, 20, or 63 mSec. The front protection rating is NEMA 4 (IP65). Operating temperature ranges from 0 to 50°C (32 to 122°F), and storage temperature spans -20 to 70°C (-4 to 158°F).
Configuration Options
The series offers configurable output options, power supplies, and mounting dimensions. Key capabilities include:
- Power Supply Options: High voltage (HV) models accept 85 to 265 Vac/dc with isolated 2500 Veff; Low voltage (LV) models accept 11 to 60 Vdc and 24/48 Vac with isolated 1500 Veff.
- Output Signals: Configurable for up to three relay outputs, one or more isolated analog outputs (4/20 mA or 0/10 Vdc), Modbus RTU communications via RS-485, transistor outputs, and SSR control outputs. Analog output accuracy is 0.1% FS with 1000 Vdc isolation.
- Relay Specifications: Relay modules provide three contacts (Com, NO, NC) with a maximum current of 8A resistive load and maximum voltage of 250 Vac continuous. Isolation is rated at 3500 Veff.
- Physical Dimensions: The unit measures 96 x 48 mm (1/8 DIN) front size with a depth of 91 mm including terminals. Panel cut-out dimensions are 92x44 mm, and weight is less than 150 gr (5.3 oz).
- Connections: Signal terminals use plug-in screw terminals with 3.81 mm pitch; power and output options utilize plug-in screw terminals with 5.08 mm pitch.
Key Product Differences
Variants within the DPS20 Series are distinguished by their power supply class (HV or LV) and the combination of output modules installed at positions Opt.1, Opt.2, and Opt.3:
- HV Models: Designed for 85 to 265 Vac/dc input.
- Lv Models: Designed for 11/60 Vdc and 24/48 Vac input.
- Output Configurations: Available with no output, single or multiple relay outputs (R1), analog outputs (AO), Modbus RTU serial output (RTU), or combinations thereof. For example, the DPS20-HV-R1-R1-RTU includes two relay outputs and one Modbus RTU output.
- Display Indicators: Front LEDs 'A' and 'B' indicate gross weight, actual tare value, net weight, units ('stock units'), or activated 'tare' function based on configuration states (on/off/fast flash).
PDF 및 매뉴얼