Australia +61-2-4272 2055 | Welcome to our new website, found an issue or bug? Please report it here
OMB-DAQ-2416-Series
High Performance Multi-Function I/O USB Data Acquisition Modules
Please contact Technical Sales Team for assistance.
- 16 Differential or 32 Single-Ended Analog Inputs, Expandable to 32 Differential/ 64 Single-Ended Channels
- 24-Bit Resolution
- Thermocouple or Voltage Input
- Nine Software-Selectable Voltage Ranges: ±20V, ±10V, ±5V, ±2.5V, ±1.25V, ±0.625V, ±0.312V, ±0.156V, and ±0.078V
OMB-DAQ-2416-Series
From
Product Overview
- Accuracy ± 0.025
- Analog I/O Note Analog Input Note: A/D CONVERTER;(OMB-DAQ-2416, OMB-DAQ-2416-4AO);A/D Converter Type: 24-bit sigma delta;A/D Data Rates:3750 samples/sec (S/s), 2000 S/s, 1000 S/s, 500 S/s, 100 S/s, 60 S/s, 50 S/s, 25 S/s, 10 S/s, 5 S/s, 2.5 S/s;Input Isolation: 500 Vdc min between field wiring and USB interface;Common Mode Rejection: Thermocouple mode, 110 dB; voltage mode, 90 dB;;ANALOG INPUTS;(OMB-DAQ-2416, OMB-DAQ-2416-4AO, OMB-AI-EXP32);Number of Channels: 16 differential/32 single-ended (thermocouples require differential mode) on OMB-DAQ-2416 or OMB-DAQ-2416-4AO. The OMB-AI-EXP32 is a multiplexer-based channel expansion module that adds an additional 16 differential/32 single ended channels.;Maximum Input Voltage: ±30V (power on), ±10V (power off);Input Impedance: 2 GΩ (power on), 390 Ω (power off);Input Leakage Current: ±10.6 nA (OMB-DAQ-2416, OMB-DAQ-2416-AO); ±20 nA (OMB-AI-EXP32); ±1µA max for input voltage >±30 V;Input Capacitance: 590 pF;Crosstalk: 100 dB adjacent channels;Channel Gain Queue: Up to 64 elements, software configurable channel and range;Warm-Up Time: 45 minutes max (OMB-DAQ-2416, OMB-DAQ-2416-4AO); 15 minutes max (OMB-AI-EXP32);Open Thermocouple Detect: Automatically enable when a channel is configured for a thermocouple sensor.;CJC Sensor Accuracy: ±0.15°C typical (15 to 35°C); ±0.5°C max (0 to 55°C);
- Breakdown Voltage Drain to Source: 50 V
- CMRR Thermocouple Mode: 110 dB, Voltage Mode : 90 dB
- Configuration Parameters Pull-Up/Down Configuration, User-Configurable Input/Output
- Data Interface Ethernet, USB 1.1, USB 2.0
- Data Interface Note Output Configuration: Digital: Each DIO bit can be independently read from (DIN) or written to (DOUT). DIN bits can be read at any time whether the DOUT is active or tri-stated.
- Digital Input Digital: Low = 0 Vdc
- Digital I/O Note DIGITAL INPUTS Number of Digital I/O Channels: 8 (OMB-DAQ-2416, OMB-DAQ-2416-4AO); 16 (OMB-AI-EXP32) Configuration: Each DIO bit can be independently read from (DIN) or written to (DOUT). The DIN bits can be read at any time whether the DOUT is active or tri-stated. Voltage Range: 0 to 15 Vdc Type: CMOS (Schmitt trigger) Characteristics: 47 kΩ pull-up/pulldown resistor, 28 kΩ series resistor Maximum Input Voltage Range: 0 to 20 Vdc max (power on/off, relative to DGND) Pull-Up/Pull-Down Configuration: All pins pulled up to 5V via individual 47 kΩ resistors (default configuration); pull-down capability is available by moving internal jumper Transfer Rate (Software Paced): 500 port reads or single bit reads per second typical Input High Voltage: 1.3V min, 2.2V max Input Low Voltage: 1.5V max, 0.6V min Schmitt Trigger Hysteresis: 0.4V min, 1.2V max "DIGITAL OUTPUTS (OMB-DAQ-2416, OMB-DAQ-2416-4AO, OMB-AI-EXP32) Number of Digital I/O Channels: 8 (OMB-DAQ-2416, OMB-DAQ-2416-4AO); 16 (OMB-AI-EXP32) Configuration: Each DIO bit can be independently read from (DIN) or written to (DOUT). The DIN bits can be read at any time whether the DOUT is active or tri-stated. Characteristics: 47 kΩ pull-up, open drain DMOS transistor Pull-Up Configuration: All pins pulled up to 5V via individual 47 kΩ resistors by default Transfer Rate (Software Paced): 500 port writes or single bit writes per second typical Output Voltage Range: 0 to 5V (no external pull-up resistor, internal 47 kΩ resistors connected to 5V by default); 0 to 15V max Drain to Source Breakdown Voltage: 50V min Off-State Leakage Current: 0.1 µA Sink Current Capability: 150 mA max continuous per output pin; 150 mA max continuous for all eight channels DMOS Transistor On-Resistance (Drain to Source): 4 Ω";Transfer Rate: Digital: 500 port reads or single bit reads per second typ, Counter: System dependent, 500 reads or writes per second;Sink Current: 150 mA
- Digital Output ±3.5 mA maximum
- Electrical Connection Removable Screw Terminal
- Electrical Output 0 to 5 Vdc
- Height 50 mm
- Impedance Input 2 GΩ (power on), 390 Ω (power off)
- Input Capacitance Analog: 590 pf, Counter: 25 pf
- Input Configuration Connected Software
- Input Type Thermocouple, Voltage
- Input Voltage Note Absolute Maximum Input Voltage: Analog: ±30V (Power On), ±10V (Power Off), Digital: 0 to 20 Vdc max (power On/Off, relative to DGND), Counter: ±20V max (Power On/Off)
- Isolation 500 Vdc Minimum between field Wiring and USB Interface
- Leakage Current ±120 nA
- Length 245 mm
- Memory EEPROM
- Microcontroller One high-performance 8-bit RISC microcontroller with USB interface (non-isolated); one high‑performance 16-bit RISC microcontroller for measurements (isolated)
- Number of Channels, Input Analog: 32 SE/16 DIFF, Digital: 8, Counter: 2
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- Output Noise Output: 30 µVrms
- Output Settling Time 45 μs
- Relative Humidity 0 to 90% RH non-condensing
- Sampling Rate 1 kHz (1,000 updates/second)
- Sampling Rate Note Single channel, 1000 S/s (max, system dependent); multiple channels, 1000 S/s divided by the number of channels (max, system dependent)
- Series ID OMB-DAQ-2416-Series
- Slew Rate 1.0 V/μs
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -40 °C
- Supply Current 340 mA
- Supply Power Note Power: 5V ±5%, 340 mA supplied by included AC adaptor (OMB-DAQ-2416-ADAP), User Output Voltage: 5V, 10 mA max available (pin 35), Isolation: 500 Vdc min measurement system to PC
- Supply Voltage 5 Vdc
- USB Cable Length 5 m
- Voltage Measurement Range ±0.20, ±10V, ±5V, ±2.5V, ±1.25V, ±0.625V, ±0.3125V, ±0.15625V, ±0.078125V
- Warm Up Time 45 min
- Weight 463 g
- Width 146 mm
- Wire Gauge 30 to 16 AWG
Supported Applications
The Omega OMB-DAQ-2416 Series consists of High Performance Multi-Function I/O USB Data Acquisition Modules. These modules are designed for use with the InstaCal™, TracerDAQ®, and Universal Library™ software suites to facilitate data acquisition tasks.
Operating Conditions & Performance
The series operates via a USB interface connection. The provided documentation does not specify hardware performance metrics such as measurement ranges, accuracy classes, resolution values, or response times for the OMB-DAQ-2416 Series modules themselves.
Configuration Options
The documented software suite supports multiple Omega data acquisition families including the OMB-DAQ-2400, OMB-DAQ-TC-RACK, OM-NET, OM-USB, OM-WEB, and OM-WLS Series. The available variant for this series is:
- OMB-DAQ-2416-4AO
Software Compatibility
The associated software package includes drivers, examples, hardware manuals, user guides, ULx for NI LabVIEW™, and the following applications:
- InstaCal™
- TracerDAQ®
- Universal Library™
Software compatibility is listed for Windows® 10/8/7/Vista® (32- or 64-bit).
Key Product Differences
The OMB-DAQ-2416 Series is identified as a USB Data Acquisition Module. The specific variant OMB-DAQ-2416-4AO represents the enumerated configuration available in this series listing.
PDFs & Manuals
Software & Drivers