검색으로 이동 메인 콘텐츠로 이동 탐색으로 이동

한국 1588-8983 | 새로운 웹사이트에 오신 것을 환영합니다. 문제나 버그를 발견하셨나요? 여기에 보고해주세요

현재 에 계신 것을 확인했습니다. 아래 링크를 클릭하여 지역 사이트를 방문하시면, 지역별 특가 혜택과 지원 서비스를 받으실 수 있습니다.

DBCL-400

주변 5 °C ~ 450 °C 온도 드라이 블록 교정기

周囲温度5 °C~450 °C ドライブロックキャリブレータ
재고가 있는 모델
  • 최대 온도 450°C (850°F)
  • 주변 온도보다 5°C (9°F) 이상
  • 독립 과온 차단기 470°C (875°F)
  • 25°C에서 400°C까지 가열 시간 12분 내 안정성 확보
DBCL-400
시작 ¥ 721,102
재고가 있는 모델
周囲温度5 °C~450 °C ドライブロックキャリブレータ DBCL-400 DBCL-400
loading all models
제품 개요
  • 정확도 ± 0.4 °C
  • 정확도 세부 사항 ±0.4°C (50~400°C) ±0.7°F (122~752°F) ±0.7°C (400~450°C) ±1.3°F (752~850°F)
  • 쿨다운 시간 사양 참고 400°C에서 100°C로 냉각: 20분
  • 치수 노트 8.75 x 8 x 8 인치/222.25 x 203.2 x 203.2 mm *휴대용 스트랩 제외
  • 디스플레이 해상도 0.1°
  • 빈도 50/60 Hz
  • 가열 시간 사양 참고 가열 시간 25° C에서 400°C까지: 12분
  • 높이 222.25 mm
  • 길이 203.2 mm
  • 작동 온도, 최대 40 °C
  • 최소 작동 온도 5 °C
  • 전력 소비 900W
  • 공정 온도, 최대 450 °C
  • 최소 공정 온도 5 °C
  • 공정 온도 사양 참고 주변 온도보다 5 °C/9 °F 높음에서 450 °C/850 °F까지; 온도 균일도: 200 °C에서 0.020 °C 및 400 °C에서 0.030 °C
  • 최대 상대 습도 0.95
  • 상대 습도 사양 참고 상대 습도 최대 95%, 비응축
  • 시리즈 ID DBCL-400
  • 온도 과부하 보호 팬 냉각: 자동; 과온도 한계: 470 °C
  • 온도 안정성 ±0.050°C (50~400°C) ±0.090°F (122~752°F) (15분 후)
  • 무게 5 kg
  • 폭 203.2 mm

Supported Applications

The Omega DBCL-400 Ambient 5 °C to 450 °C Temperature Dry Block Calibrator provides a safe, dry, constant temperature source for checking and calibrating a wide range of temperature sensors, systems, indicators, and thermometers. Designed as both a benchtop unit and a portable field instrument weighing 11 lbs (5 Kg), the series utilizes a machined aluminum block as the heat transfer medium to establish stable thermal environments.

Operating Conditions & Performance

The DBCL-400 operates within an ambient temperature range of 5°C/9°F to 40°C/104°F and supports a measurement range from 5°C/9°F above ambient up to 450°C/850°F. An over-temperature limit protection circuit is set at 470°C/875°F. The unit features an automatic fan cooling system with the following thermal response characteristics:

  • Heat up time (25°C to 400°C): 12 minutes
  • Cool down (400°C to 100°C): 20 minutes

Accuracy specifications vary by temperature range: ±0.4°C (50 to 400°C) / ±0.7°F (122 to 752°F), and ±0.6°C (400 to 450°C) / ±1.0°C (752 to 850°F). Stability after 15 minutes is specified as ±0.050°C (50 to 400°C) / ±0.090°C (122 to 752°F). Well-to-well radial uniformity is documented at 0.015°C at 100°C and 0.052°C at 300°C. The display resolution is 0.1°. Quoted specifications apply for an ambient temperature range of 10°C/50°F to 30°C/86°F; performance may deteriorate outside this range while maintaining safe operation.

Configuration Options

The series supports two primary power supply configurations: 230V, 50/60Hz, 900W and 120V, 50/60Hz, 900W. Electrical connections utilize a power cable with plug; wire color codes are Live (Brown for 240V / Black for 120V), Neutral (Blue for 240V / White for 120V), and Earth ground (Green/yellow or Green). The unit requires earth grounding to ensure proper electrical safety.

Configuration options include various inserts, accessories, and replacement parts:

  • Inserts: Multiwell insert with 1/8", 3/16", 1/4", 5/16" & 3/8" holes (DBCL-400-3041); Blank insert (DBCL-400-3047); Inserts configured for specific hole combinations including 5 x 1/4" (DBCL-400-3043), mixed sizes such as 1 x 9/16" & 1 x 1/4" (DBCL-400-3048), and Blackbody Source insert for IR pyrometers (DBCL-400-3129).
  • Accessories: Unit carrying strap (4168), Insert extractor (4153), Carrying case (DBCL-3052), and region-specific power cables including UK 240V with 13amp plug (DBCL-UKCABLE) and Euro style R/A Schuko plug (4164).
  • Replacement Parts: Heaters, temperature controllers, PRTs, solid state relays, fuses (4 amp for 240V units; 8 amp for 120V units), heater blocks, and cooling fans.

The unit dimensions are 8.75 x 8 x 8 inches / 222.25 x 203.2 x 203.2 mm (excluding carrying strap). Immersion depth is specified as 4.5" (114.3mm).

Key Product Differences

The DBCL-400 series distinguishes between two voltage variants: the DBCL-400-120 for 120V operation and the DBCL-400-240 for 230V/240V operation. Units marked 230V on the rating plate operate at 220V, while units marked 120V operate at 110V; in both cases where voltage deviates from nominal ratings, the heating rate degrades by approximately 8%. The series includes a fused plug for UK use fitted with a 5 AMP fuse. No operator-maintainable parts are located within the equipment.

액세서리

accessories

So ft sided carrying case with pockets for inserts
$742.72 / each
0 재고 있음
Insert to accept 5 x ¼ in diameter probes
$712.37 / each
2 재고 있음
Insert to accept 2 x ¼ in and 2 x 3/8 in diameter probes
$712.37 / each
0 재고 있음
Insert to accept 2 x ¼ in and 2 x ½ in diameter probes
$712.37 / each
2 재고 있음
Insert to accept 1 x ¼ in diameter probes
AUD975.45 / each
0 재고 있음
Insert blank
AUD799.41 / each
1 재고 있음
Insert to accept 1 x 9/16 in and 1 x ¼ in diameter probes
AUD975.45 / each
1 재고 있음
Insert to accept 1 x 5/8 in and 1 x ¼ in diameter probes
AUD975.45 / each
0 재고 있음
Insert to accept 1 x 11/16 in and 1 x ¼ in diameter probes
AUD975.45 / each
2 재고 있음
Insert to accept 1 x ¾ in and 1 x ¼ in diameter probes
AUD975.45 / each
1 재고 있음
ko-KR
en_AU
설정 저장