India +91 8925807296 | Welcome to our new website, found an issue or bug? Please report it here
BB701-series
-18 °C to 149 °C Temperature Blackbody Calibrator
- Model BB701 Calibrates from -18 to 149°C (0 to 300°F )
- Portable Rugged Design
- Calibrates Infrared Pyrometers Quickly and Accurately
- Built in Digital PID Autotune Temperature Controller with Temperature Readout
BB701-series
From
AUD
10,621.11
Product Overview
- Accuracy ± 0.8 °C (± 1.44 °F)
- Accuracy Detail ±0.8°C +1 digit (±1.4°F ) (worst case), ±0.3°C (±0.6°F) [over entire scale]
- Additional Features 1 Portable
- Calibration Reference Sensor Platinum RTD, 100 Ω, 0.00385
- Cavity Emissivity 0.95
- Control Mode PID Control
- Cool-Down Time Note 5 min, from ambient to -18°C (0°F)
- Data Interface RS232
- Display Type LED
- Frequency 50/60 Hz
- Height 19.5 mm
- Installation Category II
- Internal Sensing Element Platinum RTD, 100 Ω, 0.00385
- Length 36.5 mm
- Operating Temperature, Max 43 °C
- Operating Temperature, Min 4.4 °C
- Operating Temperature Note 4.4 to 29.4°C (40 to 85°F) [target plate reaches 0°F]; 4.4 to 43°C (40 to 110°F) [target plate reaches 11.8°F]
- Power Consumption 175 W
- Process Temperature, Max 149 °C
- Process Temperature, Min -18 °C
- RTD Accuracy ± 0.375 °C
- Series ID BB701-series
- Stability ± 0.6°C
- Stability Note ± 0.6°C (± 1.2°F) or less
- Target Size 63.5
- Warm Up Time 5 min
- Warm-Up Time Note 5 min, from ambient to 149°C (300°F)
- Width 35.5 mm
Supported Applications
The Omega BB701 series is a portable, rugged blackbody calibrator designed to test and calibrate infrared pyrometers. It functions as a hot/cold calibration source with a built-in precision PID digital controller. The unit provides a stable, repeatable cold calibration point, enabling users to perform quick and accurate tests without preparing an ice bath.
Standard RS232 computer interface support allows for setpoint control in automatic test applications.
Operating Conditions & Performance
The BB701 series operates with a target plate temperature range of -18 to 149°C (0 to 300°F). The cavity emissivity is specified at 0.95, and the target plate size measures 63.5 mm (2.5").
Performance specifications include:
- Accuracy: ±0.8°C ±1 digit (±1.4°F) worst case.
- Display Accuracy: ±0.3°C (±0.6°F) over the entire scale.
- RTD Accuracy: ±0.375°C (±0.75°F) worst case.
- Stability: ±0.6°C (±1.2°F) or less.
Ambient environmental conditions require temperatures between 4.4 to 29.4°C (40 to 85°F) for the target plate to reach 0°F, and 4.4 to 43°C (40 to 110°F) for the target plate to reach 11.8°F. Humidity must remain between 0 to 90% RH, non-condensing.
Warm-up time is 5 minutes from ambient to 149°C (300°F), and cool-down time is 5 minutes from ambient to -18°C (0°F).
Configuration Options
The series offers two primary power configurations:
- BB701: 115 Vac~, 50/60 Hz, 175 W.
- BB701-230VAC: 230 Vac~, 50/60 Hz, 175 W.
The unit includes a built-in RTD reference probe output and an RS232 standard interface. Internal control sensors and calibration reference sensors are Platinum RTDs (100 Ω, 0.00385). Each unit ships with a NIST-Traceable Calibration Certificate including 3 data points.
Physical dimensions for the enclosure are 19.5 H x 35.5 W x 36.5 mm L (7.75 x 14.128 x 15.5"). The unit weighs 12.7 kg (28 lb) and carries an Installation Category II rating.
Key Product Differences
The BB701 series distinguishes models by voltage input requirements while maintaining identical temperature ranges, accuracy specifications, and physical dimensions across the line:
- BB701: Hot/cold blackbody cal source configured for 115V operation.
- BB701-230VAC: Hot/cold blackbody cal source configured for 230V operation.
PDFs & Manuals