1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
CN710-Series
Contrôleurs de température verticaux 1/8 DIN avec autotune et RS485
Modèles en stock
This product series currently has an extended lead time. For a potential replacement, please see the CN4000-Series or CNPT-Series
- Dual Display
- Autotune
- RS-485 Communications
- Free Software
CN710-Series
Depuis
C$
267.57
Modèles en stock
L'aperçu du produit
- Précision ± 0.25 %
- Détail de la précision ± 0.25% span, ± 1 least significant digit
- Cutout Dimensions 92 x 46 mm
- Data Interface RS485 Modbus
- Depth Behind Panel 79.2 mm
- Display Size 9.53 mm (.37 in)
- Display Type 4 Digit LED
- Display Type Note Two 4-digit, 7-segment LED Display
- Enclosure Ratings IP66
- Form factor 1/8 DIN Vertical
- Input Type Thermocouple, RTD, Thermistor
- Measurement Type Temperature
- Measuring Range Pt100Ω RTD: 0 to 100°C, -20 to 500°C, -200 to 600°C Type B: 100 to 1800°C Type S: 0 to 1700°C Type R: 0 to 1700°C Type N: -200 to 1300°C Type E: 0 to 600°C Type T: -20 to 400°C, -200 to 400°C Type J: -20 to 400°C, -100 to 850°C Type K: -200 to 1300°C, -200 to 500°C Type L: -200 to 500°C Type U: -200 to 800°C
- Memory Backup Non-Volatile
- Number of Inputs 1
- Operating Temperature, Max 50 °C
- Operating Temperature, Min 0 °C
- Panel Thickness, Max 9.5 mm
- Supply Power Note 50/60 Hz
- Supply Power Type AC
- Weight 425 g
The CN710 Series temperature controllers offer easy-to-use programming menus designed for quick installation. These units are designed for direct or reverse acting (cooling or heating) control. The CN710 Series can be programmed for simple ON/OFF or more complex PID control functions. PID control is supported with manual or auto-tuning. Select relay, DC pulse, or current output control methods. The controller also includes two additional alarm outputs. The alarm outputs can be configured from 12 different pre-programmed settings. The temperature controller accepts a variety of thermocouple and RTD inputs. The process value and setpoint value are displayed simultaneously on the large dual LED. Auto-tuning, engineering units (°F or °C) and alarm status is also indicated on the face-plate.
PDF et manuels
Logiciels et pilotes
Accessories
signal conditioners
Mini Node Com Signal Converter
C$141.00
0 In Stock
Afficher les notes et les avis
Rated 1 out of
5
by
FredinOmaha from
So far it's a piece of junk.
It immediately goes to "No Cont" and I've spent two days attempting to find the "input" register so I can see and modify the thermocouple type. I called the factory today. They said reset to factory settings following procedure on page 19 of the manual. I tried this 3 times to no avail.
Date published: 2023-07-17
What is the output rating for the alarm contact for model CN713 temperature controller ( in amps please)
Thank you for your inquiry. The CN713 has a mechanical relay with the specs 5 A @ 250 Vac resistive.
Date published: 2023-06-14