Series-PBLTX

Transmetteurs de niveau submersibles pour eaux usées et boues, acier inoxydable 316, certifiés UL

(0)

Modèles en stock

UL-approved intrinsically safe PBLTX enables safe use in hazardous locations.
Durable 316 SS cage and diaphragm seal resist clogging and solids damage.
Maintenance-free filter keeps particulates and moisture out of the sensor.
Rugged 270 lb shielded cable provides chemical resistance and long service life.

Voir l'aperçu du produit

Series-PBLTX

Depuis ^C$ 1 624.99

Modèles en stock

Modèles de boutique

7 variantes disponibles

Voir toutes les options de séries ci-dessous

Fiche technique

L'aperçu du produit

Détail de la précision ± 0.25% FS (includes linearity, hysteresis, and repeatability)
Applications Chemical Refineries, Chemicals, Oil
Compensated Temperature, Min 0 °F
Electrical Connection Pigtail Leads
Electrical Output 4 to 20 mA
Loop Resistance 900 Ω
Media Compatibility Consult Factory
Mounting Suspended in Tank Below Level Being Measured
Output Detail 4 to 20 mA DC, 2-wire
Output Signal Current
Proof Pressure 2x Full Scale
Protection Lightning And Surge Protection
Response Time 50 ms
Supply Power Type DC
Thermal Effect ± 0.02% FS/°F

PBLT2 and PBLTX Submersible Level Transmittersare manufactured for years of trouble free service in the harshest applications. Both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 SS housing. Perfect for wastewater and slurry applications with features to protect the unit from these demanding applications. Large diameter 316 SS diaphragm seal is non-clogging and damage resistant to floating solids.

The PBLT2 incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty). The PBLTX is UL approved intrinsically safe for use in hazardous locations when used with proper barrier.

Units come equipped with a 270-pound tensile strength shielded and vented cable. Ventilation tube in the cable automatically compensates for changes in atmospheric pressure above the tank. The vent is protected with a maintenance free filter eliminating particulate or water droplets from entering the transducer.