1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
PFT2
Passages NPT sous vide et sous pression pour sceller des fils et des câbles
Modèles en stock
- Copper and Thermocouple Wire
- 1-, 2-, and 4-Wire Pairs
- PTFE Insulated Wire
- 10-8 torr/120 psi (8 bar) Rating
PFT2
Depuis
C$
250.92
Modèles en stock
L'aperçu du produit
- Area 4.8 mm²
- Housing Flats 22.4 mm
- Leak Rate Under Pressure 1 x 10⁻⁶ cc air/s at 120 psi
- Leak Rate Under Vacuum less than 10^⁻¹¹ cc He/s
- Materials Brass
- Mounting NPT
- Out Gassing <0.003% VCM; <0.34% weight loss; sample at 125°C, cold surface at 25°C
- Measurement Pressure, Max 120 psi
- Process Temperature, Max 120 °C
- Process Temperature, Min -40 °C
- Thread Size 1/2 in
- Vacuum Rating 1 x 10^-8 torr
- Wire Gauge 20 AWG
NPT feedthrough assemblies designed for sealing wire and cable in pressure and vacuum environments. Supports a maximum pressure of 120 psi. Available with PTFE insulated thermocouple alloy and copper wire options, ensuring reliable performance in demanding applications. Ideal for secure, leak-tight electrical feedthroughs.
Afficher les notes et les avis
Rated 5 out of
5
by
RJim781 from
Nice Low Temp Vacuum Feed Through
Four feet inside and out - not total. Work great. Will use again.
Date published: 2020-08-17
Rated 4 out of
5
by
mbr1 from
great value
used these several times to provide power into vacuum chambers. Great value!
Date published: 2016-03-05
Rated 5 out of
5
by
Sierra Lobo from
Great Feed Through
Great feed through for a vacuum chamber! Quick shipping too!
Date published: 2023-06-22
Hello, does the thermocouple wire come with a connector, and if so, which type of connector?
The Thermocouple wire runs through the fitting which is filled with epoxy. Each wire has stripped leads and no connector so this would be added by the customer.
Date published: 2024-02-09
Hello. Is the 48 in thermcouple length split equally on both sides of the fitting? Is customization available to shift the wire to have, say, only 6 in on the thread side? Thanks.
There is actually 48" on each side of fitting (a little over 96" total). No customer variations are available.
Date published: 2023-09-06
Hi, Can I use this feedthrough for glove box installation? Do I need an extra bolt for the other side to fix it on the glove box wall? If yes, do you have such a matching bolt? Thank you,
The fitting is a 1/2 NPT male tapered thread. It's designed to be installed into the matching female NPT connect. Typical application would be a pressure vessel with the female mating fitting installed on it. The thread engagement into the female fitting is nominally only the first 4 or 5 threads. You would typically use "plumber's tape" to seal the threads. There is no type of nut available that has NPT threads
Date published: 2021-06-16