AM-2251

Multi-Variable Controller, pH, ORP, Toroidal Conductivity, DO

Cliquez et maintenez pour zoomer

Voir toutes les modèles Voir tous les accessoires

Article# AM-2251

Ce produit arrive en fin de vie donc il ne sera plus disponible.
Pour de plus amples informations veuillez contacter notre équipe commerciale.

Voir Les Spécifications

Spécifications du produit

<< Voir toutes les modèles de produits

Brand
Additional Features 1	PID Control, Sensors Sold Separately
Calibration Note	pH Calibration modes: Automatic or Manual 2 or 3 points; Dissolved Oxygen Calibration modes: 100% sat Zero offset; ORP Calibration modes: Manual 1 point; Conductivity Calibration modes: Up to 16 points Zero offset
Compliance	ETL
Compliance Note	ETL (US and Canada) and CE pending
Conductivity Measurement	4 to 400,000 µS/cm
Cutout Dimensions	5.4 x 5.4 in
DO Measurement Range	0 to 10.3 ppm, 0 to 125% sat
Display Type	LCD
Electrical Output	4 to 20 mA
Enclosure Ratings	NEMA Type 4X
Frequency	50/60 Hz
Height	5.5 in
Input Range Note	pH Sensor Input: -600 to +600 mV; ORP Sensor Input: -999 to +999 mV; Conductivity Sensor Input: 0 to 4000 mV; Dissolved Oxygen Sensor Input: 0 to 5000 nA
Length	5 in
Mounting Orientation	Panel Mount, Wall Mount
Number of Relays	3
ORP Measurement Range	-999 to +999 mV
Operating Humidity	0 to 90% RH
Operating Temperature, Max	150 °C
Operating Temperature, Min	-20 °C
Output Detail	Two 4-20 mA outputs, Scalable 4-20mA with PID (Process), Scalable 4-20mA (Process or Temperature), Optically isolated. Max Load - 800 Ω
PH Measurement Range	0 to 14.00 pH
Power Consumption	0.2 A @ 115 Vac or 15 W
Process Temperature, Max	-20 °C
Process Temperature, Min	70 °C
Relay Note	3 Dry contact relay 10A @ 120/240 VAC or 8A @ 30 VDC (Resistive Load) 5A @ 120/240 VAC or 4A @30 VDC (Inductive load) Relay Modes: Rising/Falling/In Range. Options: Relay Delay, Overfeed Timer, Override Cycle On/Off, One relay can be triggered by temperature
Relay Output	Dry contact relay
Sensing Element	100/1000 Ω RTD, 300/3K/10K Ω NTC or none
Sensing Element Note	PH, ORP, Toroidal Conductivity, DO: 100, 1000 Ω RTD, 300, 3K or 10K Ω NTC or none with auto detect
Sensor Type Note	pH Sensor: 6-Wire Differential or Combination; ORP Sensor: 6-Wire Differential or Combination; Conductivity Sensor: Toroidal (Inductive) Non-Contacting; Dissolved Oxygen Sensor: Clark Cell Amperometric
Supply Voltage	120/240 Vac
Temperature Compensation	Automatic: pH, DO ;Autpmatic or Manual: Toroidal Conductivity ;Display temperature: ORP
Temperature Measurement Note	pH, ORP, Conductivity, DO, Toroidal Conductivity : -20 to 150 °C
Weight	2 lb
Width	5.5 in
Voir toutes Spécs Montrer moins