1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
DR-IO-Sig-Cond-TTL-to-PLC
DIN Rail Voltage Conversion I/O Modules | TTL to PLC Levels
Models In Stock
- This product line has been discontinued.
- High Density DIN Rail Mount Design
- 4000 Volt Isolation
- Logic Levels Switch High Level AC and DC Circuits
DR-IO-Sig-Cond-TTL-to-PLC
From
C$
47.11
Models In Stock
Product Overview
- Approvals CE, CSA, UL
- Height 60 mm
- Input Type Digital
- Isolation 4000 Vrms
- Length 80 mm
- Mounting DIN Rail 35 mm Standard “C” or as Top Hat
- Number of Inputs 1
- Operating Temperature, Max 70 °C
- Operating Temperature, Min -30 °C
- Storage Temperature, Max 100 °C
- Storage Temperature, Min -40 °C
- Width 7.5 mm
DR-IO Series DIN rail mount input/output modules are ideal for connecting real world discrete signals to a computer interface and other electronic equipment. Most computer interfaces can only sense or generate low level TTL (0/5Vdc) signals. The DR-IO-OAC and DR-IO-ODC output modules can be used to sense high level ac and dc signals. The compact design of the DR-IO modules permit high density mounting on a standard DIN rail. The input modules are available with negative and positive logic versions. Negative logic modules produce a high logic signal when the input signal from the field goes low and a low logic signal when the field input goes high. With the positive logic modules, the logic signal follows the field signal that is, the logic signal is high when the field signal is high and low when the field signal is low.
For complete product specifications see the Related Links section at the bottom of this page.
For complete product specifications see the Related Links section at the bottom of this page.
PDFs & Manuals