1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
HHM-EX540-Multimeter-Series
Multimètres industriels étanches (IP67) pour usage intensif
- Mesures RMS vraies pour des mesures précises de tension et courant AC
- Tension et courant AC/DC, résistance, capacité, fréquence (électrique/électronique), température, cycle de service, diode/continuité
- Double moulage pour une protection étanche (IP67), classification de sécurité Cat IV-600V pour applications industrielles
- Mode d'acquisition de données pour transmission en temps réel directement vers votre PC
HHM-EX540-Multimeter-Series
À partir de
C$
399.92
Aperçu du produit
- Test de continuité Oui
- Cycle de service 0,1 à 99,9 %
- Hauteur 184 in
- Longueur 57 in
- ID de série HHM-EX540-Multimeter-Series
- Type d'approvisionnement électrique Batterie
- Poids 349 g
- Largeur 83 in
Description
La série OMEGA™ HHM-EX540 est un enregistreur de données/multimètre sans fil polyvalent. Elle offre en outre un test de diode, un grand écran LCD rétroéclairé, une fonction d'arrêt automatique avec option de désactivation et une certification de sécurité CAT IV-600V pour les applications industrielles. L'appareil peut enregistrer jusqu'à 9999 mesures et, grâce à son interface USB sans fil, transmettre les mesures à votre PC en temps réel.
PDF & Manuels
Afficher les évaluations et les avis
Rated 1 out of
5
by
Unhappy customer 4444 from
Defective EXTECH EX530
purchased a multimeter recently (order HQ02088673). I received the multimeter but it is defective out of the box. The voltmeter mV AC mode fluctuates up to 4 mv and never gives the same reading when I short the probes together. It never goes to (or near) zero. The best stable reading I got was 0.08 mV AC. It started to fluctuate again when I released and re-shorted the probes again. I bought the EXTECH EX530 for that specific mode. (resolution of 0.01 mV in AC). I don't mind a stable zero offset. But a drift of over 400 graduations is unacceptable.
There is also a problem with the ohm meter. It fluctuates and I can not trust the continuity function (beeb) as it comes on and off whit the probes on a short peaces of steel. Even with pressure applied.
I tried a different set of probes and it does the same thing.
In the RMA process for repair
Date published: 2021-09-02
Does a new purchase of one of these units come NIST-traceable calibrated and with a certificate of calibration?
This series of meters can be ordered with a optional NIST certificate and/or a Certificate of Calibration so send a request for pricing to sales@omega.com with the specific model of interest.
Date published: 2023-01-17