1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
Series-PBLT2
Submersible Level Transmitters for Wastewater & Slurry, 316 SS
Models In Stock
- Durable 316 SS diaphragm seal and cage resist clogging and damage from solids.
- Surge protection on PBLT2 models extends service life and reliability.
- Maintenance-free filter prevents particulates and moisture from reaching sensor.
- Rugged 270 lb tensile cable with chemical resistance allows flexible installation.
Series-PBLT2
From
C$
$0.00
Models In Stock
Can't find the right model?
Use our custom configurator to fine tune your product
Product Overview
- Accuracy Detail ± 0.25% FS (includes linearity, hysteresis, and repeatability)
- Applications Chemical Refineries, Chemicals, Oil
- Compensated Temperature, Min 0 °F
- Electrical Connection Pigtail Leads
- Electrical Output 4 to 20 mA
- Loop Resistance 900 Ω
- Media Compatibility Consult Factory
- Mounting Suspended in Tank Below Level Being Measured
- Output Detail 4 to 20 mA DC, 2-wire
- Output Signal Current
- Proof Pressure 2x Full Scale
- Protection Lightning And Surge Protection
- Response Time 50 ms
- Supply Power Type DC
- Thermal Effect ± 0.02% FS/°F
PBLT2 and PBLTX Submersible Level Transmittersare manufactured for years of trouble free service in the harshest applications. Both measure the height of liquid above the position in the tank referenced to atmospheric pressure. The transmitter consists of a piezoresistive sensing element, encased in a 316 SS housing. Perfect for wastewater and slurry applications with features to protect the unit from these demanding applications. Large diameter 316 SS diaphragm seal is non-clogging and damage resistant to floating solids.
The PBLT2 incorporates lightning and surge protection utilizing dual arrestor technology, grounded to case, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty). The PBLTX is UL approved intrinsically safe for use in hazardous locations when used with proper barrier.
Units come equipped with a 270-pound tensile strength shielded and vented cable. Ventilation tube in the cable automatically compensates for changes in atmospheric pressure above the tank. The vent is protected with a maintenance free filter eliminating particulate or water droplets from entering the transducer.
Product Applications
- Wastewater
- Sludge pits, clarifiers, digesters
- Alum tanks
- Chemical storage tanks
- Oil tanks
- Lime slurry
- Sumps
- Reservoirs
Show Ratings & Reviews
Rated 5 out of
5
by
Dan77 from
Public Works Director
Good fit for our lift station. We have been using this product for 25 years in all of lift stations
Date published: 2025-09-30
