1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
PR-10E-3-100-1/4-2
Volume discounts available
Volume Discount Schedule
| Quantity | Price each |
|---|---|
| 1-4 | C$181.61 |
| 5-9 | C$172.53 |
| 10-24 | C$168.90 |
| 25-49 | C$161.63 |
| 50-99 | C$158.00 |
| 100+ | C$154.37 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | Class A |
| Accuracy Detail | Class A from -100 to 450°C (-148 to 842°F); or else Class B |
| Cable Length | 40 in |
| Electrical Connection | Stripped Leads |
| Enclosure Ratings | IP67 |
| Insulation | PFA |
| Nominal Resistance | 100 Ω |
| Nominal Resistance/Curve Note | 100 Ω at 0°C standard; TCR = 0.00385 Ω/Ω/°C standard |
| Number of Wires | 3 |
| Probe Diameter | 0.25 in |
| Probe Length | 2 in |
| Probe Type | RTD Probe with Insulated Wire and Shrink Tube Support |
| Process Temperature, Max | 600 °C |
| Process Temperature, Min | -200 °C |
| Response Time, Max | 10.6 sec |
| Sheath Material | 316 Stainless Steel |
| Shock | IEC 60068-2-27; 50g/11ms (15 probes tested together) Duration: 1 day |
| Temperature Coefficient | 0.00385Ω/Ω/°C |
| Temperature Coefficient Note | α=0.00385Ω/Ω/°C |
| Temperature Probe Style | Immersion Probe |
| Temperature Sensor Type | RTD |
| Vibration | IEC 60068-2-6; 5 to 2000 Hz sweep rate, one active per minute;10 sweep cycles; acceleration 5g (15 probes tested together) Duration: 1 day |
| Wire Gauge | 26 AWG |
| Wire Termination Temperature, Max | 250 °C |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 4 out of
5
by
MatW from
Resistance
Should have resistance listed on spec sheet for ez
Date published: 2022-08-05
Rated 5 out of
5
by
Management Project Asse from
RTD Probe
Fast delivery ,great product, I will buy again!!!!
Date published: 2022-03-10
Rated 5 out of
5
by
Jason h from
Omega
arrived quickly and read accurate when installed. no wiring schematic made connecting a little difficult, but as there is only 3 wires it was easy to figure out
Date published: 2022-02-17
Rated 5 out of
5
by
MSSG from
RTD
This is an standard commonly used in the industry for low temperature monitoring.
Stable, reliable, efficient and good application instead of a thermocouple.
I ordered many of them for our projects.
Date published: 2022-01-20
Rated 5 out of
5
by
Julio from
RTD
Work pretty good. Got the RTD within 2 weeks instead of the 1 month I was told.
Date published: 2021-06-25
Rated 5 out of
5
by
Eng1 from
Quality and consistent construction
The large number of configurations of these probes is helpful to find one that is just right for the application.
Date published: 2020-12-07
Rated 2 out of
5
by
Todd W from
RTD Bad Ground
The RTD is a three wire unit that appears robust and arrived in the configuration that was ordered. However, when it was connected to the digital controller for the oven, the sensor signal was lost each time the oven reached about 120 F. Tracing the issue revealed that one of the ground wires from the RTD had a bad connection. Just touching the wire as it exited the sensor would cause it to loss connection. The wire was not strained during installation given the generous space afforded by the oven. Since my lead wire is only 6' long, I am not so concerned about the added accuracy a 3-wire RTD offers over a 2-wire. So, I placed a jumper on the controller to connect both of the grounds together. If the lead time for ordering a new RTD was not so long, I would have returned this defective unit.
Date published: 2020-08-21