PHCN-962

pH Controller

Click and hold to zoom

Mounting Orientation

Wall Mount Panel Mount

Electrical Output

4 to 20 mA

Relay Output

SPST

C$1,595.69

Item# PHCN-962

QTY

Added to Your Shopping Cart

In Stock

Lead Time (If not in stock): 5 Days

Brand
Accuracy	± 1 mV
Calibration Note	pH Calibration modes: Programmable from 1 to 999 hours
Cutout Dimensions	93.5 x 93.5 mm
Data Interface	RS485
Deadband	pH : 0.01 to 2 pH, ORP: 1 to 200 mV
Display Size	13.7 mm (0.54 in)
Display Type	4 Digit LCD
Display Type Note	4-digit LCD, 13.7 mm (0.54"); blue backlit
Electrical Output	4 to 20 mA
Enclosure Ratings	IP65, NEMA Type 4X
Frequency	50/60 Hz
Height	213 mm
Impedance	600 Ω
Impedance Input	10¹³ Ω
Input Range Note	pH Sensor Input: -2.00 to 16.00 pH; ORP Sensor Input: -999 to +999 mV
Length	113 mm
Measurement Resolution	pH: 0.01, ORP: 1 mV
Mounting Orientation	Wall Mount
Number of Relays	3
ORP Accuracy	± 1 mV
Operating Humidity	10 to 95% RH
Operating Temperature, Max	50 °C
Operating Temperature, Min	-10 °C
Output Detail	0 to 20 mA/4 to 20 mA isolated current output
Process Temperature, Max	-9.9 °C
Process Temperature, Min	130 °C
Relay Note	Three SPST relays, rated 250V @ 1 A
Relay Output	SPST
Sensor-Transducer Connection	BNC Connector
Supply Voltage	110/220 Vac
Temperature Accuracy	± 0.5 °C
Temperature Compensation	Automatic with ±10°C offset adjustment or manual
Temperature Resolution	0.1 °C
Temperature Sensor Type	1000 Ω RTD
Width	185 mm
pH Accuracy	± 0.01 pH
See All Specs Show Less