1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
OMDC-MD-Series
DC Speed Control with Closed Loop Feedback for DC Motors
- Adjustable Min/Max Speed
- Adjustable Accel/Decel
- NEMA 4X (IP66) Rating
- Universal Power Supply, 85-265 Vac
OMDC-MD-Series
From
C$
1,663.06
Product Overview
| OMDC-MD10P controllers are used with linear encoders for precise speed control in Omega's manufacturing process for metal sheath thermocouple wire. |
| Sample Application: Synchronized conveyor controller with jog switch, the slave conveyor 2 will follow changes in speed made to the master conveyor 1. The jog switch allows positioning of conveyor 2 when system is stopped. |
The OMDC-MD series speed control is simple to operate: set the desired RPM, rate, or time in the large 1/2' LED display by depressing the “Up” and “Down” pushbuttons on the front panel. Settings can be one digit at a time or fast sweep. The OMDC-MD series speed control settings are exact and repeatable. It will precisely control speed to ±1/2 RPM of set speed, long term. No calibrations of the control are necessary.
The OMDC-MD speed control is available in both 1/8 DIN and 1/4 DIN industry standard cutout dimensions, providing easy panel installation. These DC motor controllers can be set to RPM, FPM, GRP, process time, or any other engineering unit for easy operation.
SPECIFICATIONS
Temperature: -10 to 45°C (14 to 113°F)
AC Input Voltage: 85 to 265 Vac
Input Frequency: 50/60 Hz
Overload Capacity: 200% for 1 min
Speed Signal Input: 0-5 to 0-24 Vdc, 50K Pulses/Minute (833 Hz)
On-Board Power Supply: 5 Vdc, 50 mA
Faceplate Dimensions:
OMDC-MD10P: 115 W x 58 H x 117 mm D (4.539 x 2.289 x 4.625')
OMDC-MD3P: 115 W x 106 H x 117 mm D (4.54 x 4.18 x 4.625')
NOTE: Speed feedback is required (encoder). Recommended: OMDC-PU-40E (see below).
Show Ratings & Reviews