1-800-663-4209 | Your feedback matters, take a quick survey Website Feedback
D5131
OMEGABUS Series Four Channel Sensor to Computer Interface Modules

Choose a Variant
Sensor Type
Current Measurement Range
Volume discounts available
Volume Discount Schedule
Quantity | Price each |
---|---|
1-4 | C$502.83 |
5-9 | C$477.69 |
10-24 | C$467.63 |
25-49 | C$447.52 |
50-99 | C$437.46 |
100+ | C$427.41 |
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product ModelsBrand |
![]() |
Accuracy | ± 0.02 % |
Analog I/O Note | Voltage: Input Ranges: ±100 mV, ±1 V, ±5 V, ±10 V, ±100 Vdc, Resolution: 0.01% of FS (4 digits), Accuracy: ±0.02% of FS max, Zero Drift: ±1 count maximum (autozero), Span Tempco: ±50ppm/°C maximum, Input Burnout Protection: To 250 Vac, Input Impedance: ≤ +1 V input = 100 MΩ min, ≥ +5 V input = 1 MΩ min |
Baud Rate | 300 to 115200 |
CMRR | 100 dB at 50/60 Hz |
Calibration | Autozero, no adjustment pots |
Common Mode Voltage | Input to Output at 60 Hz: 500 V rms |
Conversion Rate | 8 conversions/sec |
Current Measurement Range | N/A |
Data Interface | RS232C |
Data Interface Note | Data Format: NRZ asynchronous; 1 start bit, 7 data bits, 1 parity bit and 1 stop bit Parity: Odd, even, none Address: User selectable address Protocol: ASCII format Multidrop Modules:Up to 30 per host serial port Communications: Distance up to 1219 m (4000') (RS-485) Transient Suppression: On RS-485 communication lines Communications Error:Checking via checksum |
Drift | Zero: ±1 Count |
Electrical Connection | Screw Terminal |
Height | 6.223 mm |
Impedance Input | >1 MΩ |
Input Type | Voltage |
Leakage Current | < 2 μA |
Length | 9.144 mm |
Materials | ABS |
Memory | EEPROM |
Mounting | Spacing for mounting screws = 2.700" (6.858 cm).Screw threads = 6 X 32 |
Number of Channels, Input | Analog: 4 |
Operating Temperature, Max | 70 °C |
Operating Temperature, Min | -25 °C |
Protection | Input Protection: 250 Vac |
Relative Humidity | 0 to 95% RH non-condensing |
Resolution | 0.0001 |
Sampling Rate | 1 Hz (1 update/second) |
Sensor Type | N/A |
Storage Temperature, Max | 85 °C |
Storage Temperature, Min | -25 °C |
Supply Power Type | DC |
Supply Voltage | 10 to 30 Vdc, 0.75 W |
Temperature Coefficient | ±50 ppm/°C |
Voltage Measurement Range | ±5 V |
Width | 2.794 mm |
See All Specs |
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews
Rated 5 out of
5
by
Field Service Engineer from
Field Service Engineer, B-TEK SCALES, CANTON, OHIO
I have used the device in 2019. Current ones purchased will be used in 6 months.
Date published: 2020-04-06