1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 3 % |
| Approvals | KTW, W270, FDA - 21 CFR 175.300 |
| Burst Pressure | 2900 psi Maximum |
| Electrical Connection | DIN 43650 C 3-pin |
| Electrical Output | Amplified Square Wave |
| Filter | 20 to 40 microns Recommended |
| K-Factor | 2840 pulses/gal |
| Materials, Wetted | Graphite, PA12 Ferrite, PA12 Trogemid, PTFE |
| Media Compatibility | Liquids |
| Operating Pressure, Max | 360 psi |
| Operating Temperature, Max | 100 °C |
| Operating Temperature, Min | -20 °C |
| Output Detail | Max. 20 mA (Pull-up resistor required. See wiring diagram in User Manual.), Output (Hz): NPN sinking open collector |
| Output Signal | DC Pulse |
| Pipe Size, Max | 8 in |
| Process Connection Size | 3/8 in |
| Process Connection Type | NPT Male |
| Repeatability | <0.50% |
| Repeatability Note | <0.50% under the same operating conditions |
| Supply Current | 8 mA |
| Supply Voltage | 5 to 24 Vdc |
| Viscosity Range | 0 to 16 cSt |
| Volumetric Flow Rate, Max | 35 l/min |
| Volumetric Flow Rate, Min | 2 l/min |
| Weight | 15 g |
| See All Specs | |
PDFs & Manuals
