Skip to search Skip to main content Skip to navigation

Series-201-203-204

Carbon Steel Chamber, 1000 psi & 750 °F, for Refineries & Plants

(0)

See Product Overview

Series-201-203-204

From ^C$ 11,073.61

Shop Models

1 Variations available

See all series options below

Data Sheet

Product Overview

Conduit Connection 3/4 in NPT Female
Electrical Connection Screw Terminal
Enclosure Ratings IP66, NEMA Type 4
Media Compatibility Alcohols, Compatible Liquids, Oils, Water
Mounting Orientation Vertical
Pressure Note 600 psig (41 bar) at 100°F (37.7°C), 500 psig (34 bar) at 750°F (399°C). Higher ratings available
Pressure Type Gauge
Process Connection Note 1˝ female NPT and 1˝ socket weld hub. Optional flange connections
Process Connection Size 1 in
Process Connection Type NPT Female
Process Temperature, Max 350 °F
Process Temperature Note Process: 750°F (399°C). Heat fins should be used for process temperatures above 500°F (260°C) with mercury switches, 400°F (204°C) with snap switches, and 350°F (176.7°C) with hermetically sealed snap switches
Proof Pressure Up to 600 psi
Set Point Adjustment ± 1 in
Specific Gravity 0.6
Switch Type Note SPDT hermetically sealed snap switch
Weight 33 lb

Long life and reliable operation is inherent in the design of the 201 series. The heavy duty welded carbon steel chamber provides a control to operate up to 1000 psi (69 bar) and process temperature up to 750°F (400°C), 400°F (205°C) at the electrical head assembly. The use of an external magnet reduces the possibility of magnetic particle build up inside the armature tube and subsequent loss of operation as may occur with the internal magnet repulsion design. Choice of construction provides equipment suitable for specific gravity as low as (0.60). Electrical requirements are met by use of hermetically sealed snap action or mercury switches in a variety of actions including SPST, SPDT, DPDT and DPST arrangements. Optional circuits are available for low current/voltage DC; high current DC; or high temperature applications. Standard process connections are combination 1" NPT and 1" socket weld hubs. Flanged connections are offered as an option.