1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
HHF11-Meter
Anémomètre/ Hygromètre/ Thermomètre avec calcule de Débit d'Air/ Point de Rosée/ Bulbe Humide
Air Velocity/Humidity/Dew Point/Wet Bulb/Air Volume Meter
Modèles en stock
- Mesure de: Température, Point de Rosée, Humidité Relative, Bulbe Humide, Vitesse d'Air, Débit d'Air, Capacité
- Léger, hélice facile à manoeuvre
- °C/°F commutable
- Mise en veille automatique au bout de 10 minutes
- Afficheur géant
- Capteur monté sur roulement à billes
HHF11-Meter
Depuis
C$
680.84
Modèles en stock
L'aperçu du produit
- Accuracy ± 5 %
- Air Velocity, Min 0.3 m/h
- Battery Size and Type Alkaline AAA
- Cable Length 50 cm
- Display Type LCD
- Enclosure Temperature, Max 50 °C
- Enclosure Temperature, Min 0 °C
- Form factor Handheld
- Height 6.14 in
- Humidity Accuracy ± 3% from 10 to 90%, ± 5% above 90%
- Length 2.44 in
- Number of Digits 5
- Operating Humidity 0 to 90% RH
- Process Temperature, Max 60 °C
- Process Temperature, Min -20 °C
- Resolution 0.1 m/s
- Response Time 1 Sec
- Supply Current 8 mA
- Supply Power Note Operating Current: 5 to 8 mA
- Temperature Accuracy ± 0.6%
- Temperature Sensor Type Thermocouple Type K or Thermistor
- Vane Diameter 2.9 in
- Volumetric Flow Rate, Max 99999 CFM
- Volumetric Flow Rate, Min 0 CFM
- Weight 263 g
- Width 1.1 in
The HHF11A anemometer can measure air flow, humidity, dew point, wet bulb, air volume, and capacity. The built-in microprocessor ensures high accuracy. It can also track the maximum and minimum values along with current readings, displaying the flow rate in the user’s choice of meters per second or cubic feet per minute.
With its low-friction, ball-bearing, mounted-wheel design, the HHF11A is accurate at both high and low air velocity. The impeller is accurate to 5% FS and can measure the slightest breeze (0.3 m/s). Other features include single-point averaging of air volume and capacity, °C/°F selection, and auto shut-off after 10 minutes of non-use.
With its low-friction, ball-bearing, mounted-wheel design, the HHF11A is accurate at both high and low air velocity. The impeller is accurate to 5% FS and can measure the slightest breeze (0.3 m/s). Other features include single-point averaging of air volume and capacity, °C/°F selection, and auto shut-off after 10 minutes of non-use.
| Measurement | Range | Resolution | Accuracy |
| Air Velocity | 0.3 to 35 m/s (1 to 114 ft/s) | 0.1 | ± 5% FS |
| Air Volume | 0 to 99,999 m³/min (0 to 99,999 ft³/min) | 0.1 | ± 5% FS |
| Capacity | 0 to 99,999 BTU/h (0 to 99,999 kW) | 0.1 | ± 3% FS |
| Temperature | -20 to 60 °C (-4 to 140°F) | 0.1° | ± 0.6°C (1°F) |
| Humidity | 0 to 100% | 0.1% | ± 3% FS from 10 to 90% ± 5% FS above 90% |
| Dew Point | -68 to 70°C (-90 to 158°F) | 0.1° | ± 3% FS from 10 to 90% ± 5% FS above 90% |
| Wet Bulb | -22 to 70°C (-7.6 to 158°F) | 0.1° | ± 3% FS from 10 to 90% ± 5% FS above 90% |
PDF et manuels
Afficher les notes et les avis
Rated 1 out of
5
by
Ontario from
Not so good for low gas flows
The units would not measure the air flow in my home ductwork, so was retruned for credit
Date published: 2016-07-21
Rated 5 out of
5
by
SarahD621 from
Arrived quickly
Exactly as expected, and reliable. Arrived quickly.
Date published: 2023-08-07
Is this now outdated and should I be looking at a newer instrument?
Thank you for your inquiry about the anemometer. It is still available and serves its purpose to measure the parameters listed.
Date published: 2023-02-08