1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
DMD-465-Series-Str-Amp
Strain Amplifier/Conditioner for Bridge, Load Cell, Transducers
Models In Stock
- Bridge Excitation 4 to 15 Vdc up to 120 mA
- Works with Bridge Circuits of 120 Ohms or Higher
- Adjustable Gain and Offset
- 6-Wire Bridge Connections
DMD-465-Series-Str-Amp
From
C$
780.00
Models In Stock
Product Overview
- Capacitance 50 pF
- Common Mode Voltage ± 15V
- Compliance Voltage 10 Vdc
- Excitation Voltage Note Excitation Voltage Range: 4 to 15 Vdc Current Output: 120 mA max Line and Load Regulation: (0 to 100 mA) 0.05% max Output Noise: 0.5 mVrms
- Gain Range 40 to 250
- Height 73 mm
- Impedance Output 1 Ω
- Input Bias Current 30 nA
- Input Range 10 mV to 50 mV
- Input Resistance 4_to_20_ma_1_to_5_vdc
- Input Type Voltage
- Length 96 mm
- Linearity ± 0.05%
- Loop Resistance, Max 500 Ω
- Operating Temperature, Max 70 °C
- Operating Temperature, Min 0 °C
- Output Detail ± 10 Vdc @ 2 kΩ Load
- Sensor Excitation 4 to 15 Vdc
- Storage Temperature, Max 85 °C
- Storage Temperature, Min -25 °C
- Supply Power 115 Vac
- Supply Power Note Standard 115 Vac or optional 220 Vac ± 10% 50/60 Hz or 10 to 36 Vdc 0.7 A @ 10V, 0.17 A @ 36V at maximum excitation load
- Supply Power Type AC
- Temperature Coefficient Gain: 200 ppm/°C
- Weight 510 g
- Width 51 mm
The DMD-460 Series bridge amplifiers are self contained, ac or dc powered signal conditioning modules for strain gauges, load cells and bridge-type sensors. The DMD 465 contains a precision differential instrumentation amplifier with voltage output. The DMD 465WB is similar, but has a frequency response to 2 kHz. The DMD 466 is similar to the above units, but with a 4 to 20 mA output instead of a voltage output.
PDFs & Manuals
Accessories
cables
installation hardware
DIN Rail Mounting Kit for PST-4130
C$52.00
0 In Stock
Show Ratings & Reviews
Can this amplifier be used with a bridge having 5kOhm resistors? Thank you very much, José
Hi, that unit is designed for standard 350 ohm bridges it cannot handle a 5000 ohm bridge, the output current would be too small for this unit to detect. We do not offer a unit that can handle a 5000 ohm bridge. Thanks for connecting with us.
Date published: 2019-06-05
I'm only seeing manuals for 465 AC powered model. Where can I get a manual for 466DC?
A manual for DMD466-DC is not currently available.
Date published: 2021-07-22
Are these units CE certified?? (DMD466 -120VAC etc)
Thank you for contacting Omega with your question. Unfortunately, the DMD-460 series signal conditioners are not CE approved. For a model that is I would suggest the IN-UVI in line conditioner. Please feel free to contact us again if you have additional questions.
Date published: 2019-11-21