1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
Series-16C
1/16 DIN Temp Controller, PID, Dual LED Display, Alarm Functions
Models In Stock
- Universal input accepts RTD or thermocouple sensors
- On/Off, PID, or manual output control
- RS-485 standard on all models
Series-16C
From
C$
186.45
Models In Stock
Product Overview
- Accuracy ± 0.25% span ± 1 least significant digit
- Compliance CE, cULus
- Data Interface RS-485 Modbus ASCII
- Display Note Two 4 digit, 7 segment LED’s. PV: Red, SV: Green
- Display Type LED
- Enclosure Ratings IP56
- Input Type Thermocouple, RTD
- Memory Backup Non-Volatile
- Mounting Orientation 1/16 DIN
- Number of Digits 4
- Operating Temperature, Max 122 °F
- Operating Temperature, Min 32 °F
- Power Consumption max 5 VA
- RTD Input Range Pt100: 328 to 1112°F, -4 to 932°F, 32 to 212°F
- Supply Power Note 100-240 VAC, 50/60 Hz
- Supply Power Type AC
- Supply Voltage 100 to 240 Vac
- Temperature Sensor Type RTD or Thermocouple
- Thermocouple Input Range Note Type K: -328 to 2372°F, -328 to 932°F; Type J: -148 to 2192°F, -4 to 752°F; Type T: -328 to 752°F, 4 to 752°F; Type E: 32 to 1112°F; Type N: -328 to 2372°F; Type R: 32 to 3092°F; Type S: 32 to 3092°F; Type B: 212 to 3272°F; Type L: -328 to 932°F; Type U: -328 to 1472°F
- Weight 4 oz
The compact Series 16C Temperature Controller offers accurate temperature measurement and control in a 1/16 DIN package. Designed for direct or reverse acting (cooling or heating) control, the Series 16C can be programmed for simple ON/OFF or more complex PID control functions. PID control is supported with manual or auto-tuning. Select relay, voltage or current output for control methods.
The Series 16C accepts a variety of thermocouple and RTD inputs. Process value and setpoint value are displayed simultaneously on the large dual LED. Auto-tuning, engineering units (°F or °C), and alarm status is also indicated on the faceplate. Two alarm outputs are included on the unit with 12 preprogrammed alarm functions.
Product Applications
- Oven, boiler, or chiller control
- Hot plates/melt pots
- Food service equipment
- Environmental chambers
- Packaging equipment
PDFs & Manuals
Accessories
accessories
sensors
signal conditioners
Show Ratings & Reviews
Rated 5 out of
5
by
Eugene from
Great Product...Easy to use...program
Great Product...Easy to use...program
......
......
Date published: 2025-09-08
Rated 5 out of
5
by
RicL from
Very happy with this controller.
I purchased 2 units to run PID heater control on a system that is conveying hot organic rich gas stream. I had problems with the controller overshooting the 250F setpoint by a lot when first turning on and getting up to setpoint and the sections being heated with heat tape would get too hot. I called them and we adjusted the "D" setting down by half and now the controller stops applying voltage way before setpoint and then eases right to the setpoint perfectly. This controller has other more advanced features that I do not need but are there.
Date published: 2025-08-25
