1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
HANI-C-1.5S-M-MA
0 à 100°C, 4-20 mA, tuyau métallique sanitaire de 1,5"
Ajouté à votre panier
Configuration complète.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer pour recommencer
Spécifications du produit
<< Voir tous les modèles de produit| Marque |
 |
| Applications | Aliments et boissons, Médical, Pharmaceutique |
| Approvisionnement Remarque | 8 VCC - 28 VCC (Alimenté par boucle) |
| Caractéristiques nominales du boîtier | IP65 |
| Compatibilité avec les fluides | Eau de procédé propre / eau de refroidissement |
| Connexion électrique | M12 8 broches femelle |
| Détails de la sortie | Sortie analogique évolutive utilisateur 4 à 20 mA, étalonnage par défaut 0-100°C |
| Hauteur | 2.03 in |
| ID de série | HTS-HANI-CLAMP-S |
| Largeur | 2.38 in |
| Longueur | 2.53 in |
| Matériaux | Nylon ; silicone ; laiton ; acier inoxydable |
| Montage | Pince |
| Montage sur socle | Tuyau métallique |
| Précision | ± 0,5 °C (± 0,9 °F) |
| Résistance de boucle | (Vsupply -8V)/0,24 A |
| Signal de sortie | Courant |
| Taille du tuyau, max | 1.5 in |
| Temps de réponse | t63 : 5 s ; t90 : 10 s |
| Température de fonctionnement, max | 40 °C |
| Température de fonctionnement, min | 0 °C |
| Température maximale du processus | 100 °C |
| Température minimale du processus | 0 °C |
| Tension d'alimentation | 8 à 28 Vcc |
| Valeur brute du poids | 0.36 |
| Pays d'origine | United States |
| Voir toutes les spécifications | |
PDF & Manuels
Logiciels & Pilotes
Accessoires
Afficher les évaluations et les avis
Rated 5 out of
5
by
Stephen Baughman from
So easy to install!
We have been using in line RTD's and thermocouplers for years, this product has given us the flexibility of where to monitor temps without the costly modifications and downtime of moving a fitting for our existing products, and then the cost of having to rewire them if needed. So worth it to switch!
Date published: 2021-07-22
Rated 5 out of
5
by
Maintenance Manager from
Wonderful Product!
Hooking up the Hani Clamp to the pipe literally took 2 seconds- placed the unit on the pipe, took the band around the pipe and clasped it. It hugged the pipe just like it was made for it - because it was!
It is a pleasure using this instrument.
The readings are dead on accurate.
We were able to get the readings on a laptop since we chose not to use the 4 to 20 mA feature.
It is the best and as far as we know the only product available for taking non intrusive temperature readings from stainless pipes.
Date published: 2021-07-06
Rated 5 out of
5
by
Eric A from
Expertly-Designed, Robust Sensor
This non-invasive is a joy to work with right out of the box. Within two minutes I had the software downloaded, the sensor/clamp in place, and was reading temps; more accurately than and faster than the device installed in parallel I should add. Putting the device through its paces, it’s water tight, chemical resistant, and to some degree fall proof - though I didn’t feel like dropping it from very high to test this theory. From a sanitary perspective I enjoy that this sensor is non invasive, the brewery industry must maintain sanitary practice; any chance to remove something from a sanitary pathway - I take it. The HANI is now my go-to audit sensor around the brewery. I’ve also had nothing but superior customer service from Omega, their entire team top to bottom is a pleasure to work with.
I felt like a device seemingly so simple like this should already exist but it doesn’t. Bravo Omega. You truly are sensing great things. Will buy again and again.
Date published: 2021-07-22
Rated 5 out of
5
by
Anonymous from
Very good product
The customer found the operation to measure the temperature with the software very easy. he didn't know this kind of product.
Date published: 2022-01-26