1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
HSRTD-3-100-A-2M
HERMETICALLY SEALED RTD PROBE
Choisissez une variante
Précision
Electrical Connection
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Cable Length | 2 m |
| Détail de la précision | Class A per IEC60751 |
| Electrical Connection | Stripped Leads |
| Insulation | PFA |
| Nominal Resistance | 100 Ω |
| Number of Wires | 4 |
| Process Temperature, Max | 250 °C |
| Process Temperature, Min | -60 °C |
| Précision | Class A |
| Temperature Sensor Type | RTD |
| Tip Diameter | 3 mm |
| Wire Gauge | 26 AWG |
| Wire Type | Stranded |
| Voir toutes Spécs | |
Accessories
3-Prong Mini flat pin Connector for Thermocouple, RTD and 3-Wire Thermistor
C$8.70 / each
184 In Stock
Afficher les notes et les avis
Rated 4 out of
5
by
PROVE IT from
Resistant to magnetic flux change
I have probably purchased 30 of these over the last 5 years. They perform much better than bimetallic thermocouples for reading temperature in magnetic induction applications. The durability is good, but not outstanding in harsh environments, especially in steam at temperatures greater than 120°C (thus the purchase of 30 over the last 5 years). Their response is faster than metal clad RTDs. The rapid response allows for more contained PID controll. It would be wonderful if Omega made a steam-tolerant packing gland for the RTD where the RTD tip was not in contact with a metal (as is the case in a thermowell).
Date published: 2016-07-01
Rated 5 out of
5
by
BMJa from
RTD Probe
The RTD probe arrived quickly and is as described. The materials seem high quality and it performs as expected.
Date published: 2025-01-22
Rated 5 out of
5
by
jricha00 from
Durable and easy to use
I use these to measure the temperature on the backside of PV modules. The RTDs are easy to use and they are very durable. The pre-tinned wire leads make installation very easy.
Date published: 2020-09-14