1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
XC-XS-XT-XL-WIRE
Fil pour thermocouple haute température à gaine en fibre céramique Silfa
Modèles en stock
- Le matériau isolant en céramique est gainé sur un fil de qualité Std ou SLE
- XC : Nextel 312 standard, résistant à 1200°C (2200°F) en continu, 1425°C (2600°F) à court terme
- XS : Fil de silice, résistant à 1050°C (1900°F) en continu
- XR : Fibre de silice vitreuse Refrasil, adaptée jusqu’à 982°C (1800°F)
XC-XS-XT-XL-WIRE
À partir de
C$
230.07
Modèles en stock
Aperçu du produit
- Type de câble Thermocouple isolé
- Température minimale du processus 0 °C
- ID de série XC-XS-XT-XL-WIRE
- À utiliser avec Type de capteur Thermocouple
XC et XT : L'isolation céramique haute température Nextel 312 est proposée avec différents types de tressage. XC est le tressage standard et XT est un tressage serré. Le type de tressage n'affecte que la quantité de Nextel utilisée, et non la température nominale globale du fil thermocouple. L'isolant céramique est tressé sur chaque fil ou branche, puis une gaine finale du même isolant est tressée sur la paire de fils.
XC4 : l'isolant céramique Nextel 440 a la température nominale la plus élevée, atteignant 1300 °C (2372 °F).
XS : L'isolant en silice est un fil céramique de haute pureté (SiO2 > 99 %) qui offre une protection contre les températures élevées jusqu'à 1093 °C (2000 °F) à un prix économique.
Inconel 600, 304SS ou cuivre étamé peuvent être ajoutés comme surtressage sur l'isolation Nextel . Ce type de tresse peut renforcer la durabilité et la protection contre l'abrasion.
PDF & Manuels
Afficher les évaluations et les avis
Rated 5 out of
5
by
ProFab from
Great quality
The product we received was great quality and exactly what we need to get the job done.
Date published: 2024-02-20
Rated 5 out of
5
by
SRUNF from
Good Thermocouples
Easy to use. Tried several thermocouples for high temperature measurement, this turned out to be the best and most accurate.
Date published: 2023-08-07
Rated 5 out of
5
by
Anonymous from
EXCELENTE
Calidad, buena atencion y acompañamiento en compra
Date published: 2023-07-26
What is the density for part number XC4-K-24?
Hi Lu22,
Thank you for the inquiry. This product does not have a rated density. From the wire spec page you can find the weight / 1000 ft spool and the nominal OD.
https://assets.omega.com/pdf/cable-and-wire/thermocouple-and-rtd-wire-and-cable/XC_K_TC_WIRE.pdf
Best regards
OMEGA
Date published: 2022-12-29
Hi, may you explain the durability difference post heating, between: high temp glass, silica, vitreous silica, and nextel ceramic? Specifically 700C exposure. Most ceramic fiber insulation I've used starts to fall apart after exposure. Thank you!
Hi Abraham
High temperature glass ( HH ) is rated to 704 C and can be used without stainless steel or Inconel over braid. Over braid is available if exposed to abrasive or repeated bending conditions. It is recommended to use over braid to maintain integrity of the Nextel ceramic and silica fibers.
Best regards,
Date published: 2024-03-18
Is it durable enough to use it(XC-4) at least 50 times with inconel overbraid? One time usage is considered as increasing temp up to 750 and 04 hours of soaking time at 750 °C and again lowering temp to room temp.
Thank you for the inquiry. The XC-4 can handle this with the inconel over braid. The XC and XS can also take this temperature with inconel over braid.
Best regards
OMEGA
Date published: 2021-05-04