1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
UMR14-Series
Transmetteur-interrupteur à ultrasons de niveau/distance à portée moyenne
Modèles en stock
- Type 316 stainless steel housing (except PVC model)
- Ruggedized piezoelectric ultrasonic transducer
- Hardened & protected solid state electronics
- UV resistant, potted-in, PUR-jacketed cable
UMR14-Series
Depuis
C$
1,168.97
Modèles en stock
L'aperçu du produit
- Précision ± 0.5 %
- Cable Length 6.5 ft
- Electrical Output 2 Outputs (4-20 mA,0-10 V)
- Enclosure Ratings IP68, NEMA Type 4X
- Loop Resistance 450 Ω max @ > 15 Vdc, 250 Ω max @ 10 Vdc
- Measuring Range, Max 14 ft
- Measuring Range, Min 4 ft
- Media Compatibility Any, Clean dry air / inert gas, Clean process / cooling water, Corrosive chemicals / acids / bases, Fuel gases, HVAC / room air, Hydraulic fluids, Inert / non-reactive gases, Liquids, Oils / lubricants, Organic solvents, Steam, Nitrogen, Non-corrosive Dry Gasses, Oil, Oxygen, Solvents, Steam, Water, Water-based fluids
- Memory Non - Volatile
- Operating Humidity 0 to 100% RH
- Operating Pressure, Max 50 psi
- Operating Temperature, Max 70 °C
- Operating Temperature, Min -40 °C
- Output Signal Current, Voltage
- Resolution 0.0034 in
- Transducer frequency 120 kHz
- Ultrasonic Beam Width 12 ° at -3db
UMR14 Sensors and OmegaVIEW software put the power of ultrasonics in your hands yet retain the simplicity of push-button TEACH setup. You can quickly adjust, optimize, save and clone your applications without calibration. The UMR14 Sensors are designed to address close up and medium working distance requirements up to 14 ft. Narrow beam width and shortened minimum range gives closeup versatility. Serial data and analog outputs respond to measured distance. Non-contact technology means nothing touches your materials.
PDF et manuels
Logiciels et pilotes
Accessories
accessories
installation hardware
Afficher les notes et les avis
Rated 5 out of
5
by
Jason P from
Great sensor in R&D
This sensor is used in automotive R&D for vehicle-to-target measurement. Omegaview software is easy to use and calibrate the sensor how you want. We are using sensors analog output, 0-10 volt range.
Date published: 2023-03-27
I want to know more about the beam shape and size of the transducer. But I have not seen anything in the documentation
Thank you for your inquiry about the ultrasonic sensor. Yes, the beam width is 12 degrees in conical shape and the transducers vary in size. Click on the Manual tab and you will find general dimensions of the different sensors available.
Date published: 2021-05-04