1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
DRI-SP-DC-Signal-Splitter
DIN Rail DC Powered AC Input Signal Splitter
- Provides Two Fully Isolated 4 to 20 mA Outputs in Proportion to a Single
- 4 to 20 mA Input
- 2000 Vac Isolation
- High Density DIN Rail Mounting
DRI-SP-DC-Signal-Splitter
Depuis
C$
824.24
L'aperçu du produit
- Accuracy ± 0.1 %
- Accuracy Detail ≤ ±0.1% of full-scale input typical ≤ ±0.2% maximum @ 23°C including linearity, repeatability
- Compliance 15V (750 Ω, max)
- Current Measurement Range 4 to 20 mA
- Electrical Connection Screw Terminal
- Electrical Output 4 to 20 mA
- Height 117 mm
- Impedance Input ≤ 20 Ω
- Input Type Current
- Isolation ≥ 2000 Vac between input and output and channel to-channel
- LED Indicators Green LED indicates power on
- Length 105 mm
- Mounting DIN Rail Mount
- Number of Inputs 1
- Operating Temperature, Max 60 °C
- Operating Temperature, Min -5 °C
- Output Signal Current
- Protection Input Protection: 24 Vdc
- Relative Humidity Operating: 15 to 95 %RH @ 45°C (113°F) ;Soak: 90% RH for 24 hours @ 60°C (140°F)
- Response Time 25 msec
- Response Time Note 25 msec typical (10 to 90%)
- Span Adjustment ± 50 %
- Stability ≤ 0.025%/°C of full-scale maximum for full-scale and zero
- Storage Temperature, Max 80 °C
- Storage Temperature, Min -40 °C
- Supply Power Note 10.8 to 26.4 Vdc, 2 W per channel max Common Mode: 2000 Vac, input to ground
- Supply Voltage 10.8 to 26.4 Vdc
- Weight 227 g
- Width 22 mm
- Wire Gauge 22 to 12 AWG
- Zero Setting Adjustable Range Front accessed 10 turn pot, ± 50% of range of zero
The model DRI-SP-DC is a DIN rail mount, 4 to 20 mA signal splitter, with 2000 Vac isolation between input,output and power. It provides two fully isolated 4 to 20 mA outputs in proportion to a single 4 to 20 mA input. Front accessed zero and span potentiometers allow 50% adjustment of offset and gain to compensate for sensor errors or signal losses.
The DRI-SP-DC features plug-in screw terminals for easy installation. Two or more modules can slide together and interlock for solid, high density mounting (remove either the DIN rail foot or the adjacent unit’s faceplate, for right side or left side mounting, respectively). The module to be attached will easily slide onto the side of the mounted unit.
DC input four-wire transmitters are used to isolate and convert DC signals into proportional, standard industrial control signals. Typically an industrial control system such as a DCS or PLC requires standard industrial control signals with full isolation to ensure reliable, strong signals.
In most industrial process control or data acquisition applications, several different input sources from various field instruments (e.g. level, flow, pressure and position sensors), are common. Four-wire transmitters accept these field inputs and provide the controller (DCS & PLC) with the standard industrial signal it requires. The four-wire transmitter will increase the signal drive to high impedance loads and may improve resolution of the process variable. The DRI-SP-DC operates as a four-wire transmitter and derives its power from an independent, transformer isolated DC power source (10.8 to 26.4 Vdc).
Specifications
INPUT
Range: 4 to 20 mA
Impedance: ≠¤ 20 Ω
Protection: Withstands up to 24 Vdc without damage
Common Mode: 2000 Vac, input to ground
OUTPUT (2 Channels)
Range: 4 to 20 mA
Current Output Compliance: 15V (750 Ω, max)
LED Indication: Green LED indicates power on
Output Accuracy:
≠¤ ± 0.1% of full-scale input typical
≠¤ ± 0.2% maximum @ 23°C including linearity, repeatability and hysteresis
Adjustability: Front accessed 10 turn pot, ± 50% of range for zero and span
Stability: ≠¤ 0.025%/°C of full-scale maximum for full-scale and zero
Isolation: ≠¥ 2000 Vac between input and output and channelto- channel
Response Time: 25 msec typical (10 to 90%)
Power: 10.8 to 26.4 Vdc, 2 W per channel max
Temperature:
Operating: -5 to 60°C (23 to 140°F)
Storage: -40 to 80°C (-40 to 176°F)
Humidity (Non-Condensing):
Operating: 15 to 90% RH @ 45°C (113°F)
Soak: 90% RH for 24 hours @ 60°C (140°F)
Wire Terminal: Socketed screw terminals for 12 to 22 AWG
Weight: 227 g (0.5 lb)
The DRI-SP-DC features plug-in screw terminals for easy installation. Two or more modules can slide together and interlock for solid, high density mounting (remove either the DIN rail foot or the adjacent unit’s faceplate, for right side or left side mounting, respectively). The module to be attached will easily slide onto the side of the mounted unit.
DC input four-wire transmitters are used to isolate and convert DC signals into proportional, standard industrial control signals. Typically an industrial control system such as a DCS or PLC requires standard industrial control signals with full isolation to ensure reliable, strong signals.
In most industrial process control or data acquisition applications, several different input sources from various field instruments (e.g. level, flow, pressure and position sensors), are common. Four-wire transmitters accept these field inputs and provide the controller (DCS & PLC) with the standard industrial signal it requires. The four-wire transmitter will increase the signal drive to high impedance loads and may improve resolution of the process variable. The DRI-SP-DC operates as a four-wire transmitter and derives its power from an independent, transformer isolated DC power source (10.8 to 26.4 Vdc).
Specifications
INPUT
Range: 4 to 20 mA
Impedance: ≠¤ 20 Ω
Protection: Withstands up to 24 Vdc without damage
Common Mode: 2000 Vac, input to ground
OUTPUT (2 Channels)
Range: 4 to 20 mA
Current Output Compliance: 15V (750 Ω, max)
LED Indication: Green LED indicates power on
Output Accuracy:
≠¤ ± 0.1% of full-scale input typical
≠¤ ± 0.2% maximum @ 23°C including linearity, repeatability and hysteresis
Adjustability: Front accessed 10 turn pot, ± 50% of range for zero and span
Stability: ≠¤ 0.025%/°C of full-scale maximum for full-scale and zero
Isolation: ≠¥ 2000 Vac between input and output and channelto- channel
Response Time: 25 msec typical (10 to 90%)
Power: 10.8 to 26.4 Vdc, 2 W per channel max
Temperature:
Operating: -5 to 60°C (23 to 140°F)
Storage: -40 to 80°C (-40 to 176°F)
Humidity (Non-Condensing):
Operating: 15 to 90% RH @ 45°C (113°F)
Soak: 90% RH for 24 hours @ 60°C (140°F)
Wire Terminal: Socketed screw terminals for 12 to 22 AWG
Weight: 227 g (0.5 lb)
PDF et manuels