1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
PHCN37-Series
Contrôleur de pH avec compensation automatique de température
Modèles en stock
- Microprocessor-Based Versatility
- High and Low Alarm Setpoints
- Scalable 4 to 20 mA, 0 to 20 mA or 0 to 10 V Output
- Compact Panel Design
PHCN37-Series
Depuis
C$
1,102.39
Modèles en stock
L'aperçu du produit
- Accuracy ± 1 mV
- Additional Features 1 1/8" DIN, ORP, Sensors Sold Separately
- Calibration Note pH Calibration modes: 2 or 3 point
- Cutout Dimensions 45 x 92 mm
- Decimal Selection 3-Position, Autoranging
- Display Size 13.7 mm (0.54 in)
- Display Type 4 Digit LED
- Height 48 mm
- Impedance Input >10¹² Ω
- Length 177 mm
- Measurement Resolution pH: 0.01
- Number of Relays 2
- Output Detail 4 to 20 mA, 0 to 20 mA or 0 to 10V (scalable) software selectable
- pH Accuracy ± 0.03 pH
- PH Measurement Range 0 to 14.00 pH
- Process Temperature, Max 0 °C
- Process Temperature, Min 100 °C
- Relay Note 2 From "C" on/off relays. Configurable for latched and unlatched by software.
- Resolution 0.1, 1 mV
- Sensor-Transducer Connection pH/ORP-BNC; Temperature -Terminal Strip
- Temperature Resolution 0.1 °C
- Temperature Sensor Type 100 Ω or 1000 Ω RTD
- Weight 580 g
- Width 96 mm
This microprocessor-based family of pH panel mounted controller is designed for a wide variety of environmental monitoring applications. The units features automatic or manual temperature compensation of pH, two 5 amp mechanical relays and a choice of a scalable 4 to 20 mA, or 0 to 20 mA control or recording output or a 0 to 10 V output. For ease of operation all calibration and parameter setpoints are selectable through the front keypad.The PHCN model can be interfaced with a variety of pH electrodes.
*The ORCN and OPCN models have been discontinued. Please contact our Electronic Engineering department if you are in need of a replacement for these series.*
SPECIFICATIONS
pH Range: 0 to 14.00 pH (620 mV to -620mV); 0 to 100 °C.
Resolution: 0.01 pH, 0.1 °C
Calibration pH: 2 or 3 point
Accuracy: ±0.03 pH; ±0.5 C
Display: 4-digit, LED, 13.7 mm (0.54")
Relays: dual SPDT (form C) 5 A at 240 Vac, mechanical relay. Programmable deadband hysteresis around setpoints.
Output: 4 to 20 mA, 0 to 20 mA or 0 to 10 V (Scalable) Software selectable.
Input Impedance: >10 12 ohms
Temperature Compensation: Manual or Automatic, 0 to 100 °C using Pt 100 or 1K ohm RTD
Connectors: pH: BNC; Temperature: Terminal strip
Power: 115 Vac, 230 Vac, 50/60 Hz; 12-32 Vdc
Panel Cutout: 1 /8 DIN, 45 H x 92 mm W (1.772" x 3.622")
Dimensions: 48 H x 96 W x 177 mm D (1.89" x 3.78" x 7.00")
Weight: 580 g (1.27 lb)
Read More
*The ORCN and OPCN models have been discontinued. Please contact our Electronic Engineering department if you are in need of a replacement for these series.*
SPECIFICATIONS
pH Range: 0 to 14.00 pH (620 mV to -620mV); 0 to 100 °C.
Resolution: 0.01 pH, 0.1 °C
Calibration pH: 2 or 3 point
Accuracy: ±0.03 pH; ±0.5 C
Display: 4-digit, LED, 13.7 mm (0.54")
Relays: dual SPDT (form C) 5 A at 240 Vac, mechanical relay. Programmable deadband hysteresis around setpoints.
Output: 4 to 20 mA, 0 to 20 mA or 0 to 10 V (Scalable) Software selectable.
Input Impedance: >10 12 ohms
Temperature Compensation: Manual or Automatic, 0 to 100 °C using Pt 100 or 1K ohm RTD
Connectors: pH: BNC; Temperature: Terminal strip
Power: 115 Vac, 230 Vac, 50/60 Hz; 12-32 Vdc
Panel Cutout: 1 /8 DIN, 45 H x 92 mm W (1.772" x 3.622")
Dimensions: 48 H x 96 W x 177 mm D (1.89" x 3.78" x 7.00")
Weight: 580 g (1.27 lb)
PDF et manuels
Accessories
consumables
installation hardware
sensors
3/4 in NPT Mounting Assembly and 10 ft cable with 100 Ohm RTD ATC
C$567.02
0 In Stock
signal conditioners
Signal Conditioners for Buffer kit accessory - 4,7,10 Capsules(2 of each)
C$30.00
0 In Stock