1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
Series-DMF
Contrôleur de débit massique numérique pour 10 gaz – Fonctions d'auto-zéro et d'accord
- Straight-tube mass flow controller with auto-zero and auto-tune for high-precision gas application
- Accuracy ±1% FS, repeatability ±0.15%, covers multiple gases with programmable conversion
- Outputs include 0-5 V or 0-10 V; communication via RS-485 for totalizer, alarm, and control integration
- Rated to 500 psig, ultra-low leak integrity (<1 × 10⁻⁹ cc He/s); designed for clean, non-corrosive gases
Series-DMF
Depuis
C$
5,540.50
L'aperçu du produit
- Détail de la précision ± 1% FS including linearity between 59 to 77°F (15 to 25°C) and 10 to 60 psia (0.7 to 4 bar); ± 2% FS from 32 to 122°F (0 to 50°C) and 5 to 150 psia (0.3 to 10 bar)
- Data Interface RS485
- Leak Rate Under Vacuum less than 10^⁻9 cc He/s
- Media Compatibility Air, Argon, Carbon dioxide, Helium, Hydrogen, Nitrogen, Non-Corrosive Dry Gases, Oxygen
- Operating Temperature, Max 122 °F
- Operating Temperature, Min 41 °F
- Output Detail Linear 0-5 VDC (2000 Ω min. load impedance); 0-10 VDC (4000 Ω min. load impedance)
- Output Signal Voltage
- Particulate Size, Max 100 microns
- Measurement Pressure Type Gauge
- Process Connection Type Compression Fitting
- Repeatability ± 0.15%
- Response Time 0.6 to 1 s
- Response Time Note 0.6 to 1.0 second to within ± 2% of setpoint over 20% to 100% FS
- Supply Power Type DC
- Supply Voltage ± 15 Vdc
- Volumetric Flow Rate, Min 0 SCCM
Program, record, analyze, and control flow rates of various gases with Series DMF Digital Mass Flow Controller. Controllers are designed with straight tube sensors with restrictor flow elements to ensure laminar gas flow for accurate and repeatable results. Series DMF are unaffected by temperature and pressure variations.
Controllers can be programmed for various control functions including flow set point, totalizer, stop totalizer, totalize from preset flow, stop and preset total, auto zero, and more. Auto zero feature utilizes an automatic balancing circuit that virtually eliminates drift of zero and span. In addition, Series DMF controllers have two dry contact closures to operate pumps, valves, or other process equipment.
The Series DMF features an auto tune function to optimize control response for a specific gas under actual process conditions. Self diagnostic tests are run at power up to ensure the controller is in optimum working condition. Calibration information for up to 10 gases and conversion factors for up to 256 different gases are stored in memory. High and low gas flow alarm limits are programmed via RS-485 interface. Software supports programmable flow modes, allowing execution of custom programming of up to ten steps.
Calibration Options are available, please contact Customer Service.
PDF et manuels
