1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
FL3000-Series
Compteurs de débit à zone variable en PTFE avec vannes en PTFE
Modèles en stock
- Excellent Chemical Compatibility for Use with Corrosive or Ultra-Pure Fluids
- ± 2% of Full Scale Accuracy
- Shield Magnifies Scale for Accurate Readings
FL3000-Series
Depuis
C$
567.76
Modèles en stock
L'aperçu du produit
- Précision ± 5 %
- Air Flow, Max 8.3 SCCM
- Air Flow, Min 0.83 SCCM
- Center-to-Center Length 2.56 in
- Diameter 5.16 in
- Height 6.16 in
- Materials, Wetted Borosilicate, PCTFE (Polychlorotrifluoroethylene), Perfluoroelastomer, PTFE, Sapphire
- Media Compatibility Air, Water
- Mounting Panel Mount
- Mounting Orientation Panel Mount
- Number of Tubes 1
- Operating Pressure, Max 100 psi
- Process Connection Size 1/8 in
- Process Connection Type NPT Female
- Process Temperature, Max 66 °C
- Repeatability ± 0.25%
- Scale Length 65 mm
- Valve Included true
The FL-3000 and FL-3100 Series flow meters are designed for applications which involve corrosive or ultra-pure fluids. The meters are equipped with built-in PTFE needle valves with PCTFE, borosilicate glass, sapphire, and Perfluoroelastomer O-rings.
The special scale design, where a vertical line runs up the length of the scale and intersects the horizontal scale divisions, reduces parallax and eye fatigue, thus insuring high accuracy readings. The front polycarbonate resin shield also acts as a magnifying glass, all of which makes these Variable Area Flow Meters, far easier to read than standard industrial designs.
The special scale design, where a vertical line runs up the length of the scale and intersects the horizontal scale divisions, reduces parallax and eye fatigue, thus insuring high accuracy readings. The front polycarbonate resin shield also acts as a magnifying glass, all of which makes these Variable Area Flow Meters, far easier to read than standard industrial designs.
PDF et manuels
Afficher les notes et les avis
Rated 4 out of
5
by
Randy from
i ordered them for someone else to use
so I don't know the outcome. They looked fine and appear to be good quality
Date published: 2016-04-18
Does Omega provide electronic copies of their flow data sheets (flow rates corresponding to scale readings on the rotameter)? Thanks!
Thanks for your question; unfortunately, we do not. Data sheets have to be requested by email or over the phone.
Date published: 2019-08-16
For the included valve, can you provide a flow coefficient (i.e. pressure drop for a given flow) for the wide open condition? The data sheet lists 1 psid at 0.2 gpm for an "Accessory" PTFE valve, but is this the same as default included valve?
Thank you for your inquiry about the rotameters. Please send an email to the Flow Group at flow@omega.com and can provide the pressure loss for a specific rotameter you are interested since it varies with the media type.
Date published: 2022-09-28
These flow meters used to mount with 2 small screws in the back , now they dont have the threaded holes
The PTFE rotameters do not have 2 small screws, only the holes to thread or mount the rotameter.
Date published: 2019-11-17
Is this flow meter available in a top valve version?
Thank you for your inquiry. Please e-mail flow@omega.com with your process conditions and our Flow Engineers can advise if the modification can be done.
Date published: 2020-06-24
What is the float material for the PTFE Variable Area Flow Meter model FL-3000 or FL-3100?
Thank you for your inquiry. The float material is a sapphire and red in color.
Date published: 2024-06-25