1-800-663-4209 | Bienvenue sur notre nouveau site Web, vous avez rencontré un problème ou un bug? Veuillez le signaler ici
DPF53
Compact 3/64 DIN Size Process Meters with Full Size LED's
- Easy to Use and No Programming Required
- Zero and Span Adjustments of 2,000 Counts Each
- ±1,999 Count Display Span
- 120 dB CMR, 56 dB NMR
DPF53
Depuis
C$
216.00
L'aperçu du produit
- Conversion A/N Dual-slope, average value
- Précision ± 0.05 % rdg ±1 count
- Cutout Dimensions 22 x 68 mm
- Display Color Red
- Display Size 14.2 mm (0.56 in)
- Display Type 3.5 Digit Single LED
- Display Type Note 7-segment, LED; 14.2 mm (0.56") Decimal Points: Three positions jumper-selectable
- Excitation Voltage Note Transmitter Excitation Supply: Selectable 10V @ 30 mA or 24 Vdc @ 20 mA
- Form factor 3/64 DIN
- Front Bezel 24 H X 72 W mm
- Height 24 mm
- Impedance Input 1 MΩ
- Line Regulation ±0.01%/V of AC power
- Load Regulation ±0.5%
- Noise Rejection NMR, SIG HI to SIG LO: 60 dB, 50/60 Hz ;CMR, SIG GND to SIG LO: 86 dB, dc to 60 Hz ;CMV, SIG GND to SIG LO: -1 to +2.5 Vdc
- Number of Inputs 1
- Operating Temperature, Max 60 °C
- Operating Temperature, Min 0 °C
- Output Ripple ± 0.01 %
- Power Supply Rejection 86 dB at 50/60 Hz
- Reading Rate 2.5 samples/sec
- Relative Humidity 95% at 40°C (non-condensing)
- Resolution 0.1 mV (100 µV), 0.001V (1 mV), 0.001V (10 mV), 0.1V (100 mV)
- Sensor/Transmitter Power 10V @ 30 mA
- Signal Integration Period 100 ms
- Step Response 1 sec
- Supply Power Note 24, 100, 115 or 230 Vac ±15% @ 2 watts; 49 to 63 Hz
- Supply Voltage 7 to 32 Vdc, 24 to 230 Vac
- Temperature Coefficient ±0.01% of offset/°C
- Thermal Span Effect ±0.02% of rdg/°C
- Weight 200 g
- Width 72 mm
The DPF50 Series are discontinued. As a possible substitute, please check out the DP20 Meter for details.
The DPF50 Series provides a full-size 14.2 mm (0.56"), red or green LED display, yet is housed in a miniature case with a 24 x 72 mm (0.94 x 2.83") bezel. The case fits into a standard 3 //64 DIN cutout, 22.2 x 68 mm (0.87 x 2.68") and requires a depth of less than 120 mm (4.72") behind the panel, including plug-in screw-clamp connectors (standard).
Built-In Isolated Excitation
Model DPF52 is a low-cost 3 1 /2 digit ( ±1,999-count) process meter with a built-in, isolated excitation supply to power two- or four-wire transmitters, bridges or active transducers. Output levels of 24 Vdc at 20 mA or 10 Vdc at 30 mA are jumper-selectable.
Easy To Scale
The DPF50 Series can be shipped fully calibrated to meet a customers specific requirements (DPF50-FSE). Five signal ranges can be selected via push-on jumpers, and precision potentiometers are readily accessible behind the lens to provide zero and span adjustments of 2000 counts each. Accuracy is 99.9% of reading.
Multiple Power Options
The DPF50 Series incorporates a power supply, which is available for 24, 100, 115 or 230 Vac OR 7-32 Vdc power. All power options provide EMI filtering, so that power line noise does not affect the reading.
