Alerte: Les bureaux et les entrepôts d'expédition de DwyerOmega seront fermés pour les vacances du 25-26 Dec. et du 1 Jan, 2026
LCM101-100
100 kgf, ± 0.03%, Linearity, 3 mV/V Output, Cable
Ajouté à votre panier
Configuration terminée.
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Veuillez ajouter au panier pour la conserver ou quitter la configuration
Échec de l'enregistrement des configurations, cliquez sur le bouton Configurer Recommencer
Spécifications du produit
<< Voir toutes les modèles de produits| Brand |
 |
| Cable Length | 30 ft |
| Calibration Option | 5 POINT NIST |
| Commodity Code | 8423.90.0040 |
| DepthValue | 9.2 |
| ECCN | EAR99 |
| Electrical Connection | Cable |
| Electrical Output | 3 mV/V |
| End Rod | MREC-M6M |
| Force Type | Compression, Tension |
| Full Scale Deflection | 0.02 in |
| GrossWeightValue | 1.6 |
| Height | 38 mm |
| HeightUoM | IN |
| HeightValue | 2.3 |
| Hysteresis | ± 0.05% |
| Input Resistance | 350 ± 10 Ω |
| Interchangeability | 0.0025 |
| Length | 64 mm |
| Linearity | ± 0.03% |
| Load Button | MLBC-M6 |
| Load Cell Capacity | 100 kgf |
| Load Cell Type | S-beam |
| Materials | 17-4 PH Stainless Steel |
| NetWeightValue | 1.6 |
| OkForExport | true |
| Operating Temperature, Max | 93 °C |
| Operating Temperature, Min | -40 °C |
| Output Resistance | 350 ± 10 Ω |
| Overload, Max | 300% FS |
| Process Temperature, Max | 71 °C |
| Process Temperature, Min | 17 °C |
| Repeatability | ± 0.01% |
| Safe Overload | 150% FS |
| Series ID | lcm101-lcm111 |
| Supply Power Note | 10 Vdc, 15 Vdc maximum |
| Supply Voltage | 10 Vdc |
| Taxonomy Level 1 | SKF |
| Taxonomy Level 2 | TX |
| Taxonomy Level 3 | SM |
| Taxonomy Level 4 | MO |
| Thermal Span Effect | 0.0018% FSO/°C |
| Thermal Zero Effect | 0.0018% FSO/°C |
| Weight | 0.45 kg |
| WeightUoM | LB |
| Width | 13 mm |
| WidthValue | 11.9 |
| Wire Gauge | 24 AWG |
| Wiring/Connector Table | Green: (+) Output; White: (-) Output; Black: (-) Input; Red: (+) Input |
| Zero/Balance Error | ± 1% |
| Pays d'origine | United States |
| Voir toutes Spécs | |
PDF et manuels
Accessories
Afficher les notes et les avis
Rated 4 out of
5
by
Tim H from
good value load cells
I have 3 of these now (different capacities) . the price is reasonable, Omega is a trusted source and the service and support is very good. Make sure to buy the combined tension-compression for the best usefulness. For power and display I use the Digital Panel meter from Automation direct (yes a competitor) but Omega has a similar unit. Buy extra connectors at Newark and the load cells are plug and play (just change the settings on the display). I would give a 5 star but the spot welded covers for the strain gauge are poor in that they can bend and open up. I tie wrap them shut to prevent any issues. The hardware (buttons and rod ends) are useful but a bit pricey.
Date published: 2020-04-19