Alert: DwyerOmega offices and shipping warehouses will be closed for the holidays Dec. 25-26, 2025 and Jan 1, 2026
FV-505C-F-D
EOL
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 0.75 % |
| Accuracy Detail | ±0.75% of Reading (Liquid) (±0.5% of Reading: Typical Accuracy/ Non-Guaranteed) ±1% of Reading (Gas, Steam) |
| Commodity Code | 9026.10.7000 |
| Data Interface | BRAIN Communication |
| Data Interface Note | Communication Signal: BRAIN or HART communication signal (superimposed on a 4 to 20 mA DC signal) Note: HART is a registered trademark of the HART Communication Foundation. Conditions of Communication Line: Load Resistance:250 to 600 Ω(including cable resistance). Supply Voltage:16.4 to 42 V DC for digital communications BRAIN and HART protocols. (16.4 to 30 V DC for intrinsically safe type). BRAIN: Space from other Power Line: 15cm or more (Parallel wiring should be avoided.) Communication Distance: Up to 2 km,when polyethylene insulated PVC- sheathed cables (CEV cables) are used. Communication distance varies depending on type of cable used and wiring. Load Capacitance: 0.22 µF or less Load Inductance: 3.3 mH or less Input Impedance Communicating Device: 10 kΩ or more at 2.4 kHz. |
| DepthValue | 17.7 |
| Detector Type | Integral |
| Display Type | LCD |
| ECCN | EAR99 |
| Electrical Connection | 1/2 in NPS female Conduit with Screw Terminal block |
| Electrical Connection Note | In case of /FF1 or /CF1, CF11, /KF2, /KS2, /SF2, /SS2 the screw length is deeper than ANSI standard for 0.5 to 2 threads. |
| Electrical Output | 4 to 20 mA, Two 125 mA SPST SSR |
| Enclosure Material | N/A |
| Enclosure Ratings | IP67 Type 4X (IEC 60529) |
| GrossWeightValue | 13.31 |
| HeightUoM | IN |
| HeightValue | 13.25 |
| Materials, Wetted | 316 Stainless Steel |
| Measurement Pressure Type | Gauge |
| Media Compatibility | Clean dry air / inert gas, Liquids, Steam |
| Mounting Plates | Flange |
| NetWeightValue | 13.305 |
| OkForExport | true |
| Operating Pressure, Max | 412 psi |
| Operating Temperature, Max | 250 °C |
| Operating Temperature, Min | -29 °C |
| Output Detail | Pulse output,alarm output and status output use the common terminal, therefore these functions are not used simultaneously. Output Signal (◇): Dual Output (Both Analog and Transistor contact output can be obtained simultaneously). In this case refer to the item “Remarks on installation” for power supply and pulse output wiring. Analog: 4 to 20 mA DC, 2-wire system. Transistor Contact Output*: Open collector, 3-wire system. Pulse,alarm,status output are selected by parameter setting. Contact rating: 10.5 to 30 V DC, 120 mA DC*1 Low level: 0 to 2 V DC. *1: 10.5 to 30 V DC. 80 mA DC for ATEX Intrinsically Safe Approval (/KS2) and IECEx Intrinsically Safe Approval (/SS2) |
| Process Connection Size | 1/2 in |
| Process Connection Type | ANSI Flange |
| Repeatability | ±0.2% |
| Series ID | FV500C-Series |
| Supply Power | 10.5 to 42 Vdc |
| Volumetric Flow Rate, Max | 26 GPM |
| Volumetric Flow Rate, Min | 4.13 GPM |
| Weight | 6 lb |
| WeightUoM | LB |
| WidthValue | 15.8 |
| electrical-connection | 1/2 in NPS female Conduit with Screw Terminal block |
| See All Specs | |
PDFs & Manuals
Accessories
Integral to Remote Electronics Display
C$2 752.20 / each
0 In Stock
Integral to Remote Electronics
C$1 990.16 / each
0 In Stock
Show Ratings & Reviews