1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
 
								PRS-3-100-M12
M12 Connector RTD Probes with Class A Accuracy 3-A Sanitary
			Models In Stock
	- Pt100 Class A Sensor with M12, 4-Pin Connection Allows for Quick and Easy Installation. An M12 Extension Cable is Required for Installation.
- 3-A Approved Design, Flanges conform to ASME-BPE-2007
- Can Be Used In Sanitary, Hygienic, and Clean-In-Place Food, Dairy, Beverage and BioPharmaceutical Applications
- Wetted Surfaces are 316L Stainless Steel With a Surface Finish = 32 Microinches or Better
PRS-3-100-M12
					From
					C$
					346.98
				
						Models In Stock
				
			
		     
Product Overview
	- Accuracy Class A
- Electrical Connection M12 4 pin Female
- Insulation PVC
- Nominal Resistance 100 Ω
- Number of Wires 4
- Process Connection Type Tri-Clamp
- Process Temperature, Max 200 °C
- Process Temperature, Min -50 °C
- Sheath Material 316L Stainless Steel
- Temperature Sensor Type RTD
	 Note: These Sensors Require an M12 Extension Cable to Connect the Sensor To Your Instrumentation.
 ![3-A approved]() The 3-A Approved OMEGA PRS-S-M12 and PRS-H-M12 Series RTD Sensors are designed for use in Sanitary or Hygienic Clean-in-Place applications in the Food, Dairy, Beverage and BioPharmaceutical industries. These temperature sensors are manufactured with 316L stainless steel housings that meet the dimensional and finish requirements of 3-A Standard 74-05 and ASME BPE-2007, and are welded and processed to provide a clean, smooth, 32 microinch or better surface finish in the wetted areas for Clean-in-Place processes. The probe stems are manufactured in two configurations; with a standard ¼' diameter probe for standard duty service, and a stepped 3/8' to 3/16' diameter probe design for good response times in heavy duty applications.
 The 3-A Approved OMEGA PRS-S-M12 and PRS-H-M12 Series RTD Sensors are designed for use in Sanitary or Hygienic Clean-in-Place applications in the Food, Dairy, Beverage and BioPharmaceutical industries. These temperature sensors are manufactured with 316L stainless steel housings that meet the dimensional and finish requirements of 3-A Standard 74-05 and ASME BPE-2007, and are welded and processed to provide a clean, smooth, 32 microinch or better surface finish in the wetted areas for Clean-in-Place processes. The probe stems are manufactured in two configurations; with a standard ¼' diameter probe for standard duty service, and a stepped 3/8' to 3/16' diameter probe design for good response times in heavy duty applications.
 
				PDFs & Manuals
			
		Accessories
accessories
signal conditioners
Show Ratings & Reviews
 
			
	
	
	
        
            Rated 5 out of
            5
         by
        bryan11111 from
        Only comment: Perfect!
        Great products, the quality is spot on and as advertise. Shipping and service was perfect.
        
    Date published: 2016-03-07
        
    
        
            Rated 5 out of
            5
         by
        brewengineer from
        Very nice polished finish.
        I purchased this RTD to monitor the temperature of a keg washing system at a small craft brewery.  It fit perfectly and works great!
        
Date published: 2018-11-04
        
    Is this sensor UL certified? I haven't been able to find any documentation relating to that. Thank you
            Thanks for your inquiry, RTD's are not UL rated. Therefore this probe is not UL certified.
            
            
    Date published: 2020-07-16
         
						
						 
					
				