1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
MBH-Nozzle
Steel 1 or 2-Piece Band Heater 900 °F Max 1.25 in to 7.5 in ID
Models In Stock
- Built-In Bracket for Superior Clamping
- Unbreakable and Torque-Resistant Screw Terminals
- Temperatures Up to 480°C (900°F)
- Full Width Stainless Steel Built-In Strap
MBH-Nozzle
From
C$
140.78
Models In Stock
Product Overview
- Additional Features 1 Dual Voltage: Available depending on heater design
- Mounting Built-In Brackets (Heater Width/Number of Brackets): 38 to 76 mm (1¹⁄₂ to 3")-1;79 to 127 mm (3¹⁄₈ to 5")- 2; 130 to 145 mm (5¹⁄₈ to 6⁷⁄₈")- 3 ;178 to 254 mm (7 to 10")- 4; 257 to 381 mm (10¹⁄₈ to 15")- 5;If tighter tolerances are required, contact OMEGA
- Nominal Gap Note 9.5 mm (³⁄₈")—if a larger gap is required for probes or thermocouples, specify when ordering
- Power Tolerance +5%, -10%
- Resistance Tolerance +10%, -5%
- Sheath Temperature, Max 482 °C
- Supply Power Note Dependent on heater size and operating temperature
- Termination N/A
- Width Tolerance ± 1/16"
The Duraband heater design is the result of many years of research, development and testing for a reliable mica insulated band heater that can perform at the higher operating temperatures [up to 480 °C (900 °F)] essential to process high temperature resins, providing long, efficient service necessary for today's high productivity of plastic extruders, injection and blow molding machines.
Duraband is a proven heater design for good life efficiency and dependability. It assures maintaining the lowest winding temperatures possible, keeping a low-mass heating element assembly for fast heat-up and quick thermal response to controls. It incorporates the low thermal expansion built-in strap, a unique design feature.
Advantages and Variations
Duraband mica insulated heaters are widely used on operations involving heating of cylindrical surfaces and are manufactured in a full range of standard construction variations, physical dimensions, electrical ratings, and a complete arrangement of screw terminals and lead terminations. (See pages 13 through 18). However, these standard Duraband heater variations and terminations do not represent the full extent of our capabilities. OMEGAs engineering staff, with many years of experience in heat processing and temperature control applications, can assist you in designing the right Duraband heater for your specific application.
Duraband is a proven heater design for good life efficiency and dependability. It assures maintaining the lowest winding temperatures possible, keeping a low-mass heating element assembly for fast heat-up and quick thermal response to controls. It incorporates the low thermal expansion built-in strap, a unique design feature.
Advantages and Variations
Duraband mica insulated heaters are widely used on operations involving heating of cylindrical surfaces and are manufactured in a full range of standard construction variations, physical dimensions, electrical ratings, and a complete arrangement of screw terminals and lead terminations. (See pages 13 through 18). However, these standard Duraband heater variations and terminations do not represent the full extent of our capabilities. OMEGAs engineering staff, with many years of experience in heat processing and temperature control applications, can assist you in designing the right Duraband heater for your specific application.
PDFs & Manuals
