1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
OM-CP-XTCTemp2000-Srs
X-Series - Multi-channel Thermocouple Datalogger with LCD
Models In Stock
- Large Backlit LCD Display
- User-Friendly Front Panel
- Monitor Multiple Points
- Accepts thermocouple types J, K, T, E, R, S, B, N
OM-CP-XTCTemp2000-Srs
From
C$
1,268.21
Models In Stock
Product Overview
- Calibration Digital calibration through software
- Data Interface WiFi
- Data Interface Note USB-A to micro USB cable (included); 460,800 baud
- Electrical Connection Screw Terminal
- Enclosure Aluminium
- Form factor Benchtop
- LED Indicators 1 per channel and 2 status LEDs
- Length 184.15 mm
- Operating Temperature, Max 60 °C
- Operating Temperature, Min -20 °C
- Process Temperature, Max 60 °C
- Process Temperature, Min -20 °C
- Real Time Recording May be used with PC to monitor and record data in real time
- Samples,Max 2000000
- Sampling Rate 1 day
- Sampling Rate Note 4 Hz up to 1 reading every 24 hours
- Software Compatibility Windows® XP/VISTA/7 and 8 (32- and 64-bit)
- Start Modes Adjustable Delay Start, Immediate Start
- Supply Power Type Battery
- Temperature Accuracy ± 0.5 °C
- Temperature Accuracy Note ± 0.5 °C (0 °C to 50 °C) ± 0.9 °F (32 °F to 131 °F)
- Temperature Resolution 0.01 °C
- Temperature Sensor Type Thermocouple
- Thermocouple Resistance, Max 1000 Ω
- Time Accuracy ± 1 minute/month
- Width 65.58 mm
- Wire Gauge 24 AWG
The OM-CP-QUADTCTEMP2000-A2 and OM-CP-OCTTCTEMP2000-A2 are four and eight channel thermocouple data loggers with an LCD screen. The device features on-screen minimum, maximum and average statistics, as well as a user configurable screen that allows for any combination of channels to be displayed. The device accepts J, K, T, E, R, S, B and N type thermocouples.
The OM-CP-QUADTCTEMP2000-A2 and OM-CP-OCTTCTEMP2000-A2 are ideal for a variety of applications, whether it is remote temperature monitoring, or multiple points in a central location. Data from all channels is simultaneously logged and displayed on-screen for real-time monitoring. It can then be downloaded to a PC for further analysis.
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews
Does this meet the requirements for AMS2750G
Thank you for your question. Unfortunately, it does not.
Date published: 2022-12-29
Does this controller have any outputs
Thank you for your question. This not a controller just a Datalogger and it does not have outputs just t/c inputs.
Date published: 2022-08-12
Upon initializing the device the display has locked up and cannot access it. None of the buttons work and software will not reset the device display. I am unable to reset anything with the device and cannot calibrate the display.
Thank you for your inquiry. Please contact our DAS Department at 1-888-826-6342 or at das@omega.com regarding this issue.
Date published: 2025-09-25
Is there a way I can stop/run Datalogger while it is not connected to the computer ?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@dwyeromega.com
Date published: 2024-08-14
I have a channel that says Channel unplugged and Channel connected. so my data goes in and out
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2023-04-05
How do i change this data logger from mv to temperature. "om-cp-quadtctemp200-a2" it has ambient temp ,all 4 channels read mv i would like it to read temperature
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2023-07-06
I have a Fluke 5502 multi-product calibrator. Is there a calibration procedure available I can use to calibrate this device in-house
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM.
Date published: 2022-11-23
Can I edit the Channel title to say something more suitable for any application? I am looking to be able to export the information from the Datalogger without having to edit it in the excel file. Is this possible?
Thank you for your question. We will require more information to help on this question, please email the DAS team at DAS@OMEGA.COM
Date published: 2023-03-11