LC701

Low Capacity, Female/Female, Inline Tension Link Load Cell

0.0

(0)

Models In Stock

All Stainless Steel Construction
Accuracy 0.15%
Rugged Design for Industrial Applications
5 Point Calibration with 59 kOhm Shunt Cal Data

See Product Overview

LC701

From ^C$ 865.00

Models In Stock

Shop Models

1 Variations available

See all series options below

Data Sheet

Product Overview

5-Point Calibration 0%, 50%, 100%, 50%, 0% (in tension)
Accuracy ± 0.15 %
Additional Features 1 Internal Thread Design
Bridge Resistance 350 Ω
Cable Length 0 ft
Calibration Option 5 POINT NIST
Electrical Connection MIL-26482-I 10-6P
Electrical Output 3 mV/V
Enclosure Ratings IP65
Force Type Tension
Full Scale Deflection 0.004 in
Hysteresis ± 0.10%
Linearity ± 0.10%
Load Cell Capacity 250 lbF
Load Cell Type Tension Link
Materials Stainless Steel
Mating Connector MIL-26482-I 10-6S
Operating Temperature, Max 121 °C
Operating Temperature, Min -46 °C
Outer Diameter 1.25 in
Overload, Max 300% FS
Process Temperature, Max 71 °C
Process Temperature, Min 16 °C
Repeatability ± 0.05%
Safe Overload 150% FS
Supply Power Note 10 Vdc, 15 Vdc maximum
Supply Voltage 10 Vdc
Thermal Span Effect ± 0.007% rdg/°C
Thermal Zero Effect ± 0.0045% FSO/°C
Weight 1 lb
Wiring/Connector Table Green: (+) Output; White: (-) Output; Black: (-) Input; Red: (+) Input
Zero/Balance Error ± 1%

This product is no longer available. Please refer to LC703.

These stainless steel load cells are ideal for measuring in-line tension forces. Applications vary from cables on cranes, support rods in architectural designs, engine test beds, to industrial weighing applications. The LC701 Tension Link has a 6 ft. (2 m) cable while the LC711 has an integral MS style connector.

The LC701 and LC711 are also available in metric configurations, with ranges from 0-50 to 0-1000 kgf and metric threads. Please see the LCM701 for complete details, or contact our Pressure department for more information.

PDFs & Manuals

LC701_spec View More

View Less

Compliance