1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
Series-ST50
Mass Flow Meter for Air and Compressed Air
- Designed for plant air and compressed air flow monitoring
- Insertion-style sensor with dual 4-20 mA outputs and LCD readout
- Thermal mass air flow meter for compressed air system measurement
- Economical solution for large pipe air flow without full line penetration
Product Overview
- Calibration Accuracy Standard 2% accuracy calibration
- Data Interface RS232C
- Display Type LCD
- Electrical Connection Integral transmitter with two 1/2" NPT or M20x1.5 conduit ports
- Electrical Output Dual 4 to 20 mA
- Enclosure Ratings IP66, IP67, NEMA Type 4X
- Flow Direction Left-to-Right
- Housing Material Aluminum
- Insertion Length 6 in
- Insertion Length Note maximum “U” length
- Linear Flow Rate, Max 400 ft/s
- Linear Flow Rate, Min 0.75 ft/s
- Operating Pressure, Max 150 psi
- Process Connection Note compression fitting with Teflon ferrule
- Process Connection Size 1/2 in
- Process Connection Type NPT Male
- Process Temperature, Max 200 °F
- Process Temperature, Min 0 °F
- Repeatability ± 0.5% of reading
- Series ID Series-ST50
- Supply Power Type DC
- Supply Voltage 18 to 36 Vdc
- Temperature Compensation 40 F to 100 F (4 C to 38 C)
- Turndown Ratio 3:1 to 100:1
The Mass Flow Meter for Air and Compressed Air (Series-ST50) is a solid fit for air dryers and plant utilities where you need to keep measurements consistent. Its design focuses on reliable operation and simple handling. It is easy to integrate into routine checks and scheduled maintenance.
PDFs & Manuals
Show Ratings & Reviews