Skip to search Skip to main content Skip to navigation

1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
  1. Home
  2. See Force & Strain Measurement
  3. See Strain Meters
  4. See High Speed Load/Strain Meters and Process/Voltmeters
  5. DP7600
We noticed you are in , please visit your local site by clicking the below link for regional offers and support.
Stay here.
Go to the site >

DP7600

High Speed Load/Strain Meters and Process/Voltmeters, Dual Differential Inputs Available

0.0
(0)
High Speed Load/Strain Meters and Process/Voltmeters, Dual Differential Inputs Available
Click and hold to zoom
See all Models See all accessories

C$4,425.73 / each

Item# DP7600

In Stock

Lead Time (If not in stock): 30 weeks
+ Add to Project List
See Specs

Product Specs

<< See all Product Models
Brand
Accuracy ± 0.01 %
Accuracy Detail ± 0.01% of reading ± 1 count of A/D @ 25°C (77°F)
Bridge Resistance 100 to 5000 Ω
Bridge Resistance Note 100 to 5000 Ω; 4-wire or 6-wire configuration
Calibration Note Shunt calibration capability with span programmable from front panel; no potentiometer adjustments; access code prevents unauthorized calibration switches
Channels One channel standard, second channel optional
Coarse Gain Setting Selectable by rear switches
Commodity Code 9030.31.0000
Control Output N/A
Convert/Hold Input Normally high; if pulled low, holds display
Cutout Dimensions 2.45 x 5.06 in
Data Interface N/A
DepthValue 8.1
Digital Filter Programmable Cutoff Frequency
Display Note -32768 to 32767 with programmable decimal points; 14 mm (0.56") red LED
Display Type LED
ECCN EAR99
Electrical Connection Screw Terminal
Electrical Output N/A
Form factor 1/8 DIN
GrossWeightValue 0.15
Height 2.7 in
HeightUoM IN
HeightValue 0.6
Input Analog Filter 4-pole active anti-alias; 500 Hz cutoff on single-channel unit and 250 Hz cutoff on dual-channel unit
Input Bias Current ± 50 nA maximum ± 100 pA/°C (per input channel)
Input Configuration Front Keypad
Input Type Strain
Internal Resolution 16 bit
Length 6.9 in
Materials Copper
Measurement Type Current, Strain, Voltage
Mounting Panel
NetWeightValue 0.15
Number of Digits 5
Number of Inputs 1
OkForExport true
Operating Temperature, Max 60 °C
Operating Temperature, Min -20 °C
Output Method RJ11 jack for serial interface
Output Signal N/A
Peak Detection Updated at rate selected by digital filter, peak stored in memoryrogrammed to give limit #1 output up to 100 seconds after a programmed limit is reached. This output can be used to reset the peak reading by tying limit #1 output to remote input
Power Consumption 8 W
Range Selection Selectable by dip switch on rear of unit
Range Selection Note 5.1, 10.2, 15.3, 20.0, 26.3, 30.6, 35.1, 39.2 (in mV)
Reading Rate Limited to 1000/s divided by number of channels
Remote Inputs Display Peak, Display Runout, Reading, Reset Peak, Runout Reading, Tare
Resolution 16-bit A/D
Rollover Error ± 2 counts of A/D @ 25°C (77°F)
Runout Mode Updated at rate selected by digital filter. Runout is normally stored in memory and recalled via front-panel switch, over the serial interface, or by selecting runout display mode on rear connector.
Sampling Rate 1000 Hz
Sensor Excitation ± 15 Vdc, ± 5 Vdc @ ± 50 mA
SetPoint Outputs 4 isolated opencollector transistor outputs rated 30 Vdc maximum; will sink up to 50 mA; 300 V isolation between limit outputs and system ground; limit #1 can be programmed to be delayed from 1 to 100 seconds
Settable Parameters Digital Filter, Limits, Offset, Span
Supply Power Type AC
Supply Voltage 115 Vac
Taxonomy Level 1 CGI
Taxonomy Level 2 ME
Taxonomy Level 3 PM
Taxonomy Level 4 PO
Weight 370 g
WeightUoM LB
Width 5.18 in
WidthValue 3.5
Country of Origin United States
See All Specs Show Less
High Speed Load/Strain Meters and Process/Voltmeters, Dual Differential Inputs Available DP7600 DP7600
0.0
(0)
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 4ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
en-CA
en_CA
Save Configuration