1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
Series-FLT93B
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy Detail | •Gas Flow: ± 0.5 % reading or ± 2 SFPS [± 0,06 NMPS] •Liquid Flow: ± 0.5 % reading or ± 0.04 FPS [± 0,012 MPS] •Level/Interface: ± 0.25" [± 6,4 mm] •Temperature: ± 2 ºF [± 1 ºC] |
| Conduit Connection | 1 in NPT Female Conduit |
| Control Output | 2 SPDT, 1 DPDT |
| Enclosure Material | Aluminum |
| Enclosure Material Note | Polyester powder coated aluminum rated for NEMA Type 4X/IP67 |
| Enclosure Ratings | Explosion-Proof |
| Enclosure Ratings Note | Explosion-Proof for Class I, Division 1, Groups B, C and D; Dust-Ignition-Proof for Class II, Division 1, Groups E, F and G; Class III, Division 1; Nonincendive for Class I, II and III, Division 2, Groups A, B, C, D, E, F and G, |
| Identification Tag | Stainless steel metal tag |
| Measurement Pressure Type | Gauge |
| Measurement Pressure, Max | 2350 psi |
| Operating Temperature, Max | 140 °F |
| Operating Temperature, Min | -40 °F |
| Output Signal | Voltage |
| Pressure Note | 2350 psig [162 bar (g)] |
| Process Connection Size | 3/4 in |
| Process Connection Type | NPT Male |
| Relay Output | 6 A @ 115 Vac/220 Vac/24 Vdc |
| Repeatability Note | •Switch Point: ± 0.5 % reading •Level/Interface: ± 0.125" [± 3,2 mm] •Temperature: ± 1 ºF [± 0,6 ºC] |
| Response Time | 3 seconds |
| Sensor Material | 316L Stainless Steel |
| Sensor Temperature, Max | 350 °F |
| Sensor Temperature, Min | -40 °F |
| Series ID | Series-FLT93B |
| Service Setpoint Range | •Water-based Liquids: Set in the field. 0.01 FPS to 0.5 FPS [0,003 MPS to 0,15 MPS] for 0.75 W heater, 0.01 FPS to 3.0 FPS [0,003 MPS to 0,9 MPS] for 3.0 W heater •Hydrocarbon-based Liquids: 0.01 FPS to 1.0 FPS [0,003 MPS to 0,3 MPS] for 0.75 W heater, 0.01 FPS to 5.0 FPS [0,003 MPS to 1,5 MPS] for 3.0 W heater •Air/gas: 0.25 SFPS to 120 SFPS [0,08 NMPS to 37 NMPS] -0.75 watt heater at standard conditions of 70 ºF [21.1 ºC] and 14.7 psia [1,013 bar (a)] |
| Supply Voltage | 120 to 230 Vac, 24 Vdc |
| Switch Type | Flow / Level Switch |
| Weight | 8 lb |
| See All Specs | |
Show Ratings & Reviews