1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
D6400
Modbus® Serial Interface Modules
Choose a Variant
Output Signal
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Accuracy | ± 0.05 % |
| Analog I/O Note | Analog Input Note: Voltage: Number of Channels: 7 differential voltage inputs, Ranges: ±0.025V, ±0.05V, ±0.1V, ±1V, ±5V, ±10V, Resolution ADC: 16-bit ADC, 25/20 conversionsper second, Accuracy: ±0.05% of FS maximum, Span Tempco: ±50ppm/°C maximum, Input Burnout Protection: To 250 Vac, Input impedance: 20 MΩ min, Power Requirements: Serial = 1.4W;Current: Number of Channels: 7 differential current inputs, Range: ±20 mA, Resolution ADC: 16-bit ADC, 25/20 conversions per second, Accuracy: ±0.05% of FS maximum, Span Tempco: ±50ppm/°C maximum, Voltage Drop: 2.0V maximum, Input impedance: <100 Ω (70 typical), Power Requirements: Serial = 1.4W;Thermocouple: Number of Channels: 7 differential thermocouple inputs, Thermocouple Types: J, K, T, E, R, S, B, and C, Thermocouple Accuracy (Error From all Sources) from 0 to 40°C Ambient: J, K, T, E = ±1.5°C maximum; R, S, B, C = ±3.5°C maximum; (300°C to +F.S.), Resolution ADC: 16-bit ADC, 25/20 conversionsper second, Input Impedance: 20 MΩ min, Cold Junction Compensation: Automatic, Lead Resistance Effect: <40 µV per 350 Ω, Indication: Open thermocouple and over range indication, Input Burnout Protection: To 250 Vac, Power Requirements: Serial = 1.4W |
| Baud Rate | 9600 to 115200 |
| Common Mode Voltage | Input to Output at 115 Vrms, 60 Hz: 500 Vrms |
| Conversion Rate | 25/20 conversions/sec |
| Current Measurement Range | ± 20 mA |
| Data Interface | RS485 |
| Data Interface Note | Modbus RTU protocol;Configuration Method: Modbus |
| Digital Filter | Programmable |
| Digital Output | 5 mA minimum, 10 mA maximum |
| Electrical Connection | Screw Terminal |
| Height | 102 mm |
| Impedance Input | Voltage: 20 MΩ, Current: <100 Ω (70 typical), Thermocouple: 20 MΩ |
| Input Type | Voltage, Current, Thermocouple |
| Lead resistance effect | Thermocouple: <40 µV/350 Ω |
| Length | 38 mm |
| Materials | ABS |
| Memory | EEPROM |
| Mounting Note | 165 mm on center |
| Number of Channels, Input | Analog: 7 DIFF |
| Number of Channels, Output | None |
| Operating Temperature, Max | 70 °C |
| Operating Temperature, Min | -25 °C |
| Output Settling Time | 0.1% FS: 1 ms |
| Output Signal | None |
| Pull-up Resistor | 10 kΩ |
| Relative Humidity | 0 to 95% RH non-condensing |
| Sampling Rate | 25 Hz (25 updates/second) |
| Storage Temperature, Max | 85 °C |
| Storage Temperature, Min | -25 °C |
| Supply Power Note | Power Requirements: Serial = 1.4 W |
| Supply Power Type | DC |
| Supply Voltage | 10 to 30 Vdc |
| Temperature Coefficient | Voltage: ±50 ppm/°C, Current: ±50 ppm/°C |
| Transmission Distance | 1219 m |
| Voltage Measurement Range | ±0.025V, ±0.05V, ±0.1V, ±1V, ±5V, ±10V |
| Width | 152 mm |
| Country of Origin | United States |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews