1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
OME-DB-24SSR-series
24-Channel Solid State Relay Output Board for OME-PIOD144
- 24 SSR (AC)
- One OPTO-22 Compatible Connector, One 37-Pin D-Sub Connector and One 20-Pin Connector
- Connects Directly to OME-PIO-D144
- LED ’s Indicate Relay Status
OME-DB-24SSR-series
From
C$
2 136.09
Product Overview
- Control Output SSR
- Cycle Time 1 ms
- Height 130 mm
- Inrush Current 50 A
- Leakage Current 5 mA
- Number of Channels 24
- Operating Temperature, Max 60 °C
- Operating Temperature, Min 0 °C
- Power Consumption +5 V @ 0.4 A
- Relative Humidity 5 to 90 % RH non-condensing
- Relay Current 4 A
- Storage Temperature, Max 70 °C
- Storage Temperature, Min -20 °C
- Supply Power Note Repetitive Peak-off Voltage: 600 V
- Supply Voltage 5 Vdc
- Switching Voltage 250 Vac
- Voltage Source 50 to 250 Vac
- Width 220 mm
The OME-DB-24SSR includes 24 normally open, or Form A, solid-state relays. The board interfaces to field logic signals, eliminating ground-loop problems and isolating the host computer from damaging voltages. The user can use the OME-DB-24SSR to switch high voltage loads up to 240 Vac and up to 4 A. The relay is energized by applying a 5 V signal to the appropriate relay channel on the 50-pin OPTO-22 compatible connector or 37-pin D-Sub connector. Twenty-four enunciator LED's, one for each relay, light when their associated relay is activated. Because there is a D-Sub 37-pin connector on the board, the user may use it to interface to any TTL output board.
PDFs & Manuals
Show Ratings & Reviews
Rated 1 out of
5
by
Grommit from
Disappointed
Doesn't work. a lot of money heading into the bin.
Date published: 2019-03-17