1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
DP8PT-330-EIP
PLATINUM™ Series Digital Panel Meters
Choose a Variant
Data Interface
Display Type
Control Output
Retransmission Output
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| A/D Conversion | 24-bit sigma delta |
| Accuracy | 0.03 % FS |
| Additional Features 1 | Programmable 3 Color Display |
| Approvals | UL, cUL, CE, UKCA |
| CMRR | 120 dB |
| Configuration | Differential |
| Control Output | 2 SPDT Relay |
| Cutout Dimensions | 45 mm |
| Data Interface | Ethernet, USB |
| Data Interface Note | Ethernet Standards Compliance: IEEE 802.3 10/100 Base-T auto-switching, TCP/IP, ARP, HTTPGET Protocols: OMEGA ASCII, MODBUS® ASCII/RTU |
| Digital Filter | Programmable |
| Display Range | -1999 to 9999 |
| Display Size | 21 mm (.82 in) |
| Display Type | 4 Digit LED |
| Electrical Connection | RJ45 |
| Enclosure Ratings | NEMA Type 1 |
| External Fuse Required | Time-Delay, UL 248-14 Listed: 100 mA/250 V; 400 mA/250 V (low voltage option) ;Time-Lag, IEC 127-3 Recognized: 100 mA/250 V; 400 mA/250 V (low voltage option) |
| Form factor | 1/8 DIN |
| Frequency | 50 to 400 Hz |
| Height | 48 mm |
| Impedance Input | Process/Strain: 10M Ω for ±100 mV, 1M Ω for other voltage ranges ;Process Current: 5 Ω ;Thermocouple: 10K Ω max |
| Input Current | 4 to 20 mA, 0 to 24 mA |
| Input Type | Thermocouple, RTD, Thermistor, Current, Voltage, Strain |
| Input Voltage | -100 to 100 mV, -1 to 1 V, -10 to 10 Vdc |
| Isolation | Power to Input/Output: 2300 Vac per 1 min test; 1500 Vac per 1 min test (low voltage/power option) Power to Relays/SSR Outputs: 2300 Vac per 1 min test Relays/SSR to Relay/SSR Outputs: 2300 Vac per 1 min test RS232/RS485 to Inputs/Outputs: 500 Vac per 1 min test |
| Length | 127 mm |
| Measuring Range | Process Voltage: ±50 mV, ±100 mV, ±1, ±10 Vdc;Process Current: Scalable within 0 to 24 mA;Thermocouple;Type J: -210 to 1200 °C ;Type K: -270 to 160 °C and -160 to 1372 °C;Type T: -270 to -190 °C and -190 to 400 °C;Type E: -270 to -220 °C and -220 to 1000 °C;Type R: -50 to 40 °C and 40 to 1788 °C;Type S: -50 to 100 °C and 100 to 1768 °C;Type B: 100 to 640 °C and 640 to 1820 °C;Type C: 0 to 2320 °C;Type N: -250 to -100 °C and -100 to 1300 °C;RTD;Pt, 0.00385, 100 Ω, 500 Ω, 1000 Ω: -200 to 850 °C;Pt, 0.003916, 100 Ω: -200 to 660 °C;Pt, 0.00392, 100 Ω : -200 to 660 °C;Thermistor;2252 Ω: -40 to 120 °C;5K Ω: -30 to 140 °C;10K Ω: -20 to 150 °C |
| Number of Inputs | 1 |
| Operating Temperature Note | 0 to 50°C (32 to 122°F), 90% RH non-condensing |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 0 °C |
| Polarity | Bipolar |
| Power Consumption | 4 W |
| RTD Input Range | 100/500/1000 Ω Pt sensor, 2-, 3- or 4-wire; 0.00385, 0.00392 (100 Ω only), or 0.003916 (100 Ω only) curves |
| Reading Rate | 20/sec |
| Relative Humidity | 0.9 |
| Resolution | 0.1° temperature; 10 µV process |
| Retransmission Output | N/A |
| Sampling Rate | 20 Hz (20 updates/second) |
| Sensor/Transmitter Power | 5, 10, 12 and 24 Vdc @ 25 mA |
| Sensor/Transmitter Power Note | Firmware selectable (no jumpers to set) to 5, 10, 12, and 24 Vdc @ 25 mA |
| Strain Input | ± 50 mV, ± 100 mV |
| Supply Power Note | 90 to 240 Vac ±10%, 50 to 400 Hz*, 110 to 375 Vdc, equivalent voltage |
| Supply Power Type | AC |
| Supply Voltage | 90 to 240 Vac |
| Temperature Stability | RTD: 0.04°C/°C ;TC@ 25°C (77°F): 0.05°C/°C ;Cold Junction Compensation Process: 50 ppm/°C |
| Thermistor Input Range | 2252 Ω, 5K Ω, 10K Ω |
| Thermocouple Type | J, K, T, E, R, S, B, C, N |
| Warm Up Time | 30 mins |
| Weight | 295 g |
| Width | 48 mm |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Accessories
cables
meters/controllers
Show Ratings & Reviews
Rated 4 out of
5
by
Christinew from
Soes what its intended
Works great and as it should. Will purchase again in the future
Date published: 2023-02-26
Rated 5 out of
5
by
Reliability Lab from
Great Process Signal Conditioner and Display
We have been using these panel meters for a few years now in our lab to set up and monitor several different test parameters: temperature (thermocouple or RTD), pressure, flow etc. Easy to set up, great features (multiple input options, min, max readings, programmable outputs), and very reliable operations. Overall, a very versatile product for all you transducer signal conditioning, display and monitoring applications.
Date published: 2022-10-20
Rated 4 out of
5
by
Nimin from
Intuitive & easy to use panel
Pretty straightforward display with the required features like 2 point alarms and versatile outputs (map to alarms or retransmit). However, one set of the NO and NC outputs of one seems to be a little mixed up. Not a problem as long as you can get the wiring right.
Date published: 2021-04-04
Rated 5 out of
5
by
Anonymous from
President
I needed guidance to connect my sensor to the digital display. The customer service technician who helped me was excellent, and he was very patient with me as I am not an electronic technician. I am a chemical engineer, and I did not know how to work through the rather confusing procedure required to properly connect the two components. On the other hand your phone system handling the employees working from home was pretty pathetic, especially for a company like Omega. It gave me a very hard time.
Date published: 2020-06-17
Rated 5 out of
5
by
Airborne from
Great Panel Meter
Unit easy to set up, see youtube for a step by step setup.
Date published: 2020-05-04