1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
DP20
Panel Meter - 1/8" DIN
Choose a Variant
Data Interface
Control Output
Retransmission Output
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Analog Input Note | 4 to 20 mA, 0 to 10 Vdc (+15 Vdc excitation voltage configurable at terminal 5) |
| Applications | Assembly Line, Control Panel, Laboratories and Scientific |
| Control Output | N/A |
| Data Interface | N/A |
| Decimal Points | Configurable |
| Digit Size | 14 mm |
| Display Range | -1999 to 9999 |
| Display Type | 3.5 Digit LED |
| Electrical Connection | Screw Terminal |
| Enclosure Ratings | IP65, NEMA Type 4 |
| Form factor | 1/8 DIN |
| Input Type | Thermocouple, RTD, Thermistor, Current, Voltage, DC or AC, Resistance, Frequency |
| Measuring Range | Thermocouple: Type K: -100 to 1350 °C;Type J: -100 to 1200 °C;Type E: -100 to 1000 °C;Type N: -100 to 1300 °C;Type L: -100 to 900 °C;Type R: 0 to 1768 °C;Type S: 0 to 1768 °C;Type T: -100 to 400 °C;Type C: 0 to 2300 °C;Type B: 700 to 1820 °C ;RTD: Pt100(3 wires): 200 to 700 °C ;Pt100(2 wires): 200 to 700 °C ;Pt500: -150 to 630 °C ;Pt1000: -190 to 630 °C ;Ni100: -60 to 180 °C ;Ni200: -60 to 120 °C ;Ni1000: -60 to 180 °C ;Resistance: 0 to 5K: from 9999 to -1999;0 to 50K: from 9999 to -1999;Potentiometers Nominal Value: 500 R to 20 K: from 9999 to -1999;Frequency: 15 Hz to 100 Hz: from 9999 to -1999; Signal Ranges: AC Voltages and AC Currents: 600 Vac, 200 Vac, 20 Vac, 2 Vac, 200 mVac, 60 mVac, 5 Aac, 20 mAac (True RMS measure) (accepts phase-neutral and phase-phase measure) ;DC Voltages and DC Currents: ± 600 Vdc, ± 200 Vdc, ± 20 Vdc, ± 2 Vdc, ± 200 mVdc, ± 60 mVdc, ± 5 Adc, ± 20 mAdc;Refer Tables for more information; Analog Input: 4 to 20 mA, 0 to 10 Vdc |
| Number of Inputs | 1 |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 0 °C |
| Power Consumption | 2.5 W |
| Probe Type | Resistive ‘Pt’ Probes: Pt100 with 2 and 3 wires, Pt500, Pt1000 Resistive ‘Ni’ Probes: Ni100, Ni200, Ni1000 Resistive NTC Probes: See table at page 4 Resistive PTC Probes: Families KTY-121, KTY-210 and KTY-220 |
| Reading Rate | 3/sec |
| Resistance Measurement Range | Up to 20 KΩ |
| Response Time | <300 ms. (0 % to 99 % of signal) |
| Retransmission Output | N/A |
| Sampling Rate | 3 Hz (3 updates/second) |
| Sensor/Transmitter Power | 15 Vdc |
| Span Temperature Drift | 150 ppm/°C |
| Supply Power Note | 18 to 265 Vac/dc (isolated 1500 Veff @ 60 seconds) |
| Supply Power Type | AC/DC |
| Supply Voltage | 18 to 264 Vac/Vdc |
| Thermal Effects | 150 ppm/°C |
| Thermocouple Type | J, K, T, E, R, S, B, C, N, L |
| Weight | 150 g |
| See All Specs | |
PDFs & Manuals
Show Ratings & Reviews
Rated 5 out of
5
by
Wm Ed from
Panel Meter
I found just what I was looking for with the Omega Engineering DP20-M1 panel meter. Simple installation and easy to configure. For support, Omega Engineering has a very good manual online for this unit which is great.
Date published: 2024-03-21
Rated 5 out of
5
by
SMF1030 from
Easy to work with
very easy to order and get updates from Omega. I always order from Omega
Date published: 2024-01-02
Rated 5 out of
5
by
John Henry from
Just what we needed
Item was in stock and exactly what we needed, info from the site was extremely helpful.
Date published: 2023-09-28
Rated 5 out of
5
by
Nathan DCS from
Process temp
It was very pleased with this controller it was easy to use program and set up.
Date published: 2022-08-11
Rated 5 out of
5
by
Electricman from
Versatile meter
Very versatile meter. Multi-input covers just about any need you may have. Easy programming also.
Date published: 2022-08-01
Rated 2 out of
5
by
Knudsen from
A step backwards in quality.
Much lower quality than the now discontinued displays we would get from Omega. The bezel feels like it's going to break when (you must) take it off. Has to be exactly right, in order to put back on. It may have some more features, but the enclosure is really poorly constructed. I feel for the person that would need to deal with this on-site in a dark, dusty basement. The unit is setup with a hand-full of PCB jumpers. I though that we had evolved beyond that in the 90's. I have not tested the dubious-looking panel clamps.
Date published: 2020-12-16