1-800-663-4209 | Welcome to our new website, found an issue or bug? Please report it here
CN08D3-R-DC
CND3 Temperature and Process PID Controller
Choose a Variant
Added to Your Shopping Cart
Configuration complete.
Please add to cart to keep it or exit the configuration
Please add to cart to keep it or exit the configuration
Failed to Save Configurations, Click on Configure Button Start Again
Product Specs
<< See all Product Models| Brand |
 |
| Altitude,Max | 2000 m |
| Commodity Code | 9032.90.0000 |
| Control Mode | PID Control, Fuzzy Control, Self-tune, Manual tuning, On-off control |
| Control Output | SPST Relay |
| Data Interface | None |
| DepthValue | 3.9 |
| Display Type | 3.5 Digit LCD |
| Display Type Note | LCD display. Process value (PV): Yellow color, Set point (SV): Green color, 3.5 Digit Dual Display Display Accuracy: 0 or 1 digit to the right of the decimal point (selectable) |
| ECCN | EAR99 |
| Form factor | 1/8 DIN |
| GrossWeightValue | 0.52 |
| HeightUoM | IN |
| HeightValue | 2.85 |
| Input Type | Thermocouple, RTD, mA, Voltage |
| Measurement Type | Current, Temperature, Voltage |
| Measuring Range | Type K: -200 ~ 1300°C, Type J: -100 ~ 1200°C, Type T: -200 ~ 400°C, Type E: 0 ~ 600°C, Type N: -200 ~ 1300°C, Type R: 0 ~ 1700°C, Type S: 0 ~ 1700°C , Type B: 100 ~ 1800°C, Type L: -200 ~ 850°C, Type U: -200 ~ 500°C, Type TXK: -200 ~ 800°C, RTD (JPt100): -20 ~ 400°C, RTD (Pt100): -200 ~ 850°C, Resistance (Ni120): -80 ~ 300°C, Resistance (Cu50): -50 ~ 150°C, Analog Voltage Input (0~5V): -999~9999, Analog Voltage Input (0~10V): -999~9999, Analog Voltage Input (0~20m A): -999~9999, Analog Voltage Input (4~20m A): -999~9999, Analog Voltage Input (0~50m V): -999~9999 |
| NetWeightValue | 0.525 |
| Number of Inputs | 1 |
| OkForExport | true |
| Operating Temperature, Max | 50 °C |
| Operating Temperature, Min | 0 °C |
| Output Detail | Relay;Relay output: Max. load 250Vac, 5A resistive load;Alarm Output - Relay output: Max. load 250Vac, 3A resistive load |
| Output Signal | None |
| RTD Type | 100 Ω pt or Jpt sensor; 3-wire Pt100 |
| Ramp and Soak | Multiple Ramp & Soak |
| Relative Humidity | 35% ~ 80% RH（non-condensing） |
| Sampling Rate | 10 Hz (10 updates/second) |
| Sampling Rate Note | Analog input: 0.1 sec/scan; Thermocouple or Platinum RTD: 0.1 sec/per scan |
| Series ID | CND3-Series |
| Shock Resistance | Max. 300m/ s² , 3 times in each 3 axes, 6 directions |
| Storage Temperature, Max | 65 °C |
| Storage Temperature, Min | -20 °C |
| Supply Power Note | 80 ~ 260Vac 50/60Hz; 24Vac 50/60Hz ± 10%; 24 Vdc ± 10% |
| Supply Power Type | DC |
| Supply Voltage | 24 Vac/Vdc |
| Taxonomy Level 1 | CTG |
| Taxonomy Level 2 | PI |
| Taxonomy Level 3 | ND |
| Taxonomy Level 4 | PO |
| Thermocouple Type | J, K, T, E, N, R, S, B, L, U, TXK |
| Vibration Resistance | 10 to 55Hz, 10m/s² for 10min, each in X, Y and Z directions |
| WeightUoM | LB |
| WidthValue | 4.5 |
| Country of Origin | China |
| See All Specs | |
PDFs & Manuals
Software & Drivers
Show Ratings & Reviews
Rated 4 out of
5
by
TimK from
Great programmable controller
This controller is just what I needed to upgrade my existing furnace controller to a controller with program/profile capabilities. It does everything I need it to do for this application. The only drawback is that the buttons are difficult to push, but once set up, this is a minor issue.
Date published: 2023-03-06
Rated 5 out of
5
by
Denise Testa from
Cost Wise
This is a cost wise controller that performs well. Omega is a trusted Company I have used for years.
Date published: 2022-02-01
Rated 4 out of
5
by
Scott C from
Powerful, Compact, bit tricky to learn
Works well, good features, bit tricky to program until reading on line manual. The included paper document is not clear about the button press timings to activate the three different menus.. Increasing and decreasing temperatures a bit slow as numbers increment and decrement slow as you hold the button. Bubble membrane buttons are not so easy to use they are so small, and require significant pressure to activate. You have to hold the little head unit I installed them in from moving as you press. Seems to hold temperatures very nicely, display is nice. Overall it is a very nice feature packed unit, and fairly easy to use once you figure it out.
Date published: 2021-05-10
Rated 5 out of
5
by
W Clay from
good quality temperature controller
This instrument does exactly what I want and is very stable. It is easy to program as long as you follow the flow chart provided.
Date published: 2021-04-07
Rated 5 out of
5
by
Pappy Balz from
Best low cost PID controller
Great low cost PID controller and great engineering assistance.
Date published: 2021-02-26
Rated 5 out of
5
by
Pappy Balz from
Great controlller
Great product with excellent features. Fair and away the best controller for the price.
Date published: 2021-02-19
Rated 5 out of
5
by
Anonymous from
Great device for the cost
Great little device for the money. I used it to heat a battery at a specific ramp rate until failure. Once it ran through its autotune, it held VERY accurately to that ramp rate. It takes a bit to learn all the functions, but once you know the features you need regularly it becomes straight forward. It has a lot more functionality than I think I'd ever need.
Date published: 2020-12-24
Rated 5 out of
5
by
Anonymous from
Nice price to feature ratio.
Easy to use, very good cost to feature ratio. Ramp functions are very useful, would have been nice to have finer resolution on ramp timing, but it works quite well.
Date published: 2020-04-25